Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

I finally got it

Welcome Guest, Log in or Register
Author 
Barry Reid Stir

07-24-2002 11:16:56




Report to Moderator

Good Afternoon fellow Fergy buffs. Im proud to say I finally figured out how to get my hydraulic line off my TE-30 . After I unscrewed the 3/4 inch nut that is located on the botttom front right of the transmission housing. I thought thats all I had to do was pull it out and plug the hole. Not so. After I backed off the nut as far as it would go, I had to actualy unscrew the hydraulic line itself. Its the big hex nutt that the hydraulic line is attached to. Once I did that about 5 turns and off itg came. I plugged to hole last night and changed all my fluids. She runs better now that it has in over a year.Thanks to all who tried to assist me in the past. This is one great site loaded with valuable info. thanks again
Barry

[Log in to Reply]   [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy