Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Governor for Z120 Continental

Welcome Guest, Log in or Register
Author 
Joseph

05-06-2003 20:55:43




Report to Moderator

Please help can a fly weight governor be replaced with a ball governor on a Z120 continental engine in a TO-20 Ferguson? If it can be replaced do you have a diagram that you can e-mail




[Log in to Reply]   [No Email]
Duner Wi

05-08-2003 18:32:22




Report to Moderator
 Re: governor for Z120 Continental in reply to Joseph, 05-06-2003 20:55:43  
The I&T manual says to use a shim washer approximately 1/16 in. thick ( Ferguson # 12CH208) when replacing the flyweight governor with a Novi ball governor. Shim is inserted between cam gear and governor driver assembly per manual.



[Log in to Reply]  [No Email]
Scott

05-07-2003 06:13:38




Report to Moderator
 Re: governor for Z120 Continental in reply to Joseph, 05-06-2003 20:55:43  
Joseph
Yes it can and you don't need a diagram it just fits in place of the weighted one.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy