Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Harry Ferguson Tractors Discussion Forum
:

spark plug gap

Welcome Guest, Log in or Register
Author 
mkbc14

05-01-2005 15:31:13




Report to Moderator

I replaced the timing chain and govenors im not sure of the spark plug gap tea 20 4 cylinder and i am not sure how to ajust the govenors there is an ajustment screw but dont know how to ajust. please help me. All the input every one gave me on the timing realy helped a lot this forum is the best and thanks to every one.this project has let me drink lots of blues




[Log in to Reply]   [No Email]
John(UK)

05-02-2005 09:46:51




Report to Moderator
 Re: spark plug gap in reply to mkbc14, 05-01-2005 15:31:13  
That screw only stops the governor surging. If you email me at:- fergusontractors at tiscali dot co dot uk
I will send the instructions for setting the governor with pictures. When you mail me tell me what you need again please, to save me searching for this mail.Plug gap =.030"-.032"ChampionL10, points if it is 6v are .010" - .012" or 12v are.015"



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy