Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Harry Ferguson Tractors Discussion Forum
:

**KING PIN REPLACEMENT TO-20**

Welcome Guest, Log in or Register
Author 
KEITH-IN(US)

04-08-2008 18:26:13




Report to Moderator

I am in the process of replacing the king pin on my To-20.. I managed to get it out of the front axle jus tthe other night, but it looks a little different than the ones that I am seeing for sale on this site and alos on EBAY for sale.. I am hoping that someone on here can give me a little insight.. First off there was NO bushing to be found in the cradle nor in the center of the axle itself.. The pin itself measures 1.750 dia. and the overall length of the pin including the front flange is 4.875 in total length.. and the bolt hole in the bottom of the flange seems to be for a 7/16 bolt because the hole measures .450 dia. The pin still has the original stamping still on it and it reads as follows: TO-3126 don't know if this will help in my situation or not but there it is.. If any one can help I would greatly appreciate it..

[Log in to Reply]   [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy