Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
Order Ford NAA Parts Online

1953 naa 3pt lift

Welcome Guest, Log in or Register
Author 
Tony

12-02-2002 19:44:27




Report to Moderator

i need to know how to prime the pump.
fluid had water and air in it.




[Log in to Reply]   [No Email]
Adam

12-02-2002 20:09:52




Report to Moderator
 Re: 1953 naa 3pt lift in reply to Tony, 12-02-2002 19:44:27  
to prime the pump. take some hydraulic oil and pour it in the top of the pump, pour a little at a time with the engine running at ((idle))until you get it full and bubbles stop coming to the top. be sure engine is at idle or you will get hydraulic oil everywhere. I have a video on the rebuilding of NAA 600& 800 series tractors hydraulics. I rebuilt the hydraulics in my 641 workmaster last summer. If you have any other questions or this does not work e-mail me at adamd_55@hotmail.com and I will get back to you.oh and be sure to move the lift control lever so that you can get hydraulic fluid through to the lift cylinder and the air out.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy