Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Ford Tractors Discussion Forum
:

Transmission gears must stop turning before engageing

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
bjr

08-08-2007 09:28:45




Report to Moderator

Okay, now you'll say don't get in such a big hurry and allow the tranny gears to stop before engaging PTO. This is how I operate the Tiller in smaller gardens, I have to back up to start next pass,rather than turning around, and when I lift the tiller up the drive shaft is pretty severe angle so I disengage PTO the back up and the lower tiller and engage PTO. This makes for a lot of operating levers/pedals/throttle and oh yeah don't back into the fence, pretty busy, so sometimes gears are still turning when PTO engagement happens. This explanation is not to say I'm operating properly, just what happens in reality. bjr

[Log in to Reply]   [No Email]
souNdguy

08-08-2007 11:06:49




Report to Moderator
 Re: Transmission gears must stop turning before engageing in reply to bjr, 08-08-2007 09:28:45  
That's fine.. but don't blame the observed results on tranny design as it is most clearly an operator issue. In the interest of provide fair and accurate info to those choosing tranny/pto types it should be said that as far as 'working operation' goes, the non ind pto setups are just as 'good'.. they just operate differently than the ind. types..

Soundguy



[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy