Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Ford Tractors Discussion Forum
:

Excuse my ignorance but where is the 12, 14, 16, etc...

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
awhtx

05-04-2008 18:31:53




Report to Moderator

measured on a plow?




[Log in to Reply]   [No Email]
lonestarjeff

05-04-2008 21:44:37




Report to Moderator
 Re: Excuse my ignorance but where is the 12, 14, 16, etc... in reply to awhtx, 05-04-2008 18:31:53  
Alan....measure from face of one landside to the face of the other. Imagine a straight line along each edge so you can get a square measurement.

Jeff



[Log in to Reply]  [No Email]
~~HB~~ in NC

05-05-2008 07:47:17




Report to Moderator
 Re: Excuse my ignorance but where is the 12, 14, 16, etc... in reply to lonestarjeff, 05-04-2008 21:44:37  
The easy way to determine if you have a 12", 14" or 16" plow is to measure from one plow beam to the same location on the adjacent plow beam. A 5 second job.
~~HB~~ in NC



[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy