Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Fordson Tractors Discussion Forum

Power Major engine

Welcome Guest, Log in or Register
Author 
Jim K

10-21-2004 19:01:42




Report to Moderator

Are the engines in the Major, power major, and super major the same size?
I'm trying to locate an engine rebuild kit for my Power Major and when I search this site for the kit, they only list ones for the Major and super major.Reading my repair manual also leads me to believe that they are,And what then is the difference between the three tractors if the engines are all the same size.
Thanks Jim K

[Log in to Reply]   [No Email]
ron algiere

10-22-2004 16:57:29




Report to Moderator
 Re: Power Major engine in reply to Jim K, 10-21-2004 19:01:42  
the head gaskets are the same on the major and power major , I'm not sure about the super. The diference in horsepower was created through different camshafts and bigger valves.



[Log in to Reply]  [No Email]
Mark 1

10-30-2004 09:11:58




Report to Moderator
 Re: Power Major engine in reply to ron algiere, 10-22-2004 16:57:29  
My two 1959 Power Majors have different sleeves and head gaskets than my 1958 Major????? My Super has a non-copper gasket.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy