Help on Fordson Super Major Identification (S/N# P94720)

1) There is only one brake Pedal that acts on both drum brakes located in the end of the half shafts near the rear wheels. (By the way the brakes are very inefective)

2) The hidrolics are also quit simpler than what I find in other FSM's and in the literature I have: There is only a lever that is not paralel to the tractor longitundinal Axis as usual but is tranversal. There is no draught control or auxiliar service control valve.

3) Hidraulics only works when PTO is engaged. (I think this is usual)

4) The rest of the tractor is quite identical to FSM. I suspect this could be a reconstruction of a older Fordson Model or an Industrial version??

Could any one help me to identify this tractor

Thanks
Luis

I take a little longer than I expect to get the casting numbers but here are the results:

I didnīt find the casting number in the front axle, the other ones are as follows:

Engine Serial number : P94720

Engine head casting number : 60506 ( the second zero could be a 8 ) J3167 (or J3157 difficult to read)

Engine Block casting number : EIADDN6015 T3 Under the seat (Hidraulics case): M3B

Gearbox : /C13F

Simms injection pump sn# : GPE 4A75 S 497

Note the tractor as plate in the firewall that identifies this tractor as being made in England.

The casting code in the engine block is: 60506 j3557

I have to check the remaining casting codes in the tractor but I only can do that next Thursday. I will post them to you then.

Regards
Luis