TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Atlas Walk behind snowblower

Welcome Guest, Log in or Register

Author

Scott M. Harris

09-07-2000 17:04:40

Report to Moderator

Need any info on this machine if possible.

[Log in to Reply] [No Email]

Jim Sullivan

01-03-2004 17:32:11

Report to Moderator

Re: Atlas Walk behind snowblower in reply to Scott M. Harris, 09-07-2000 17:04:40

I also have an atlas snowblower that my mom and dad gave me that they had bought for my Grandfather about 30 years ago at Montgomery Wards, all i know about it is that it is a 5 hp and that it has an electric start plus a pull start, it still runs pretty good but i would like to get a hold of an owners manual for it, can anyone help?

[Log in to Reply] [No Email]

Jim

09-08-2000 13:46:21

Report to Moderator

Re: Atlas Walk behind snowblower in reply to Scott M. Harris, 09-07-2000 17:04:40

I have an Atlas Snow Thrower(blower) Model SN420A

I have the owners manual with parts list. The assembly istructions. The engine operating and maintenance instructions for Briggs and Stratton models: 100200 to 100292 130200 to 130292

Jim

[Log in to Reply] [No Email]

Herb

12-20-2003 17:40:16

Report to Moderator

Re: Re: Atlas Walk behind snowblower in reply to Jim, 09-08-2000 13:46:21

Sorry can't help you. I am looking for a source of parts for an Atlas 15-5211A snow thrower, particularly the clutch spring. I think this is a newer model (only about 20-25 yrs old!). At some point I was advised that another company had bought Atlas' stock of parts, but I can't find that reference. I have 3 of these snow throwers in the hope of having parts, but clutch springs are gone on 2 of them. I can't believe parts were made JUST for this machine--does anyone have any ideas?

Herb

[Log in to Reply] [No Email]

Jerry4245

01-07-2008 10:13:33

Report to Moderator

Re: Re: Re: Atlas Walk behind snowblower in reply to Herb, 12-20-2003 17:40:16

My friend and I both have an atlas #15-5211 we both replaced the clutch springs in 1991. His just broke again. MTD bought out ATLAS. You can get a spring from MTD or jackssmallengines.com You might have somebody close who sells MTD. The part# they use to replace it is 707893 and it sells between 30 & 40 dollars.

[Log in to Reply] [No Email]

Dan

03-23-2004 14:37:34

Report to Moderator

Re: Re: Re: Atlas Walk behind snowblower in reply to Herb, 12-20-2003 17:40:16

You might try www.hanceco.com. I have bought parts from them before.

Anyone have a copy of the manual for the 15-8261A model snow thrower. This is a two stage unit with an 8 hp motor. I would love to get a copy of the manual.

Dan

[Log in to Reply] [No Email]

Anthony

01-16-2004 09:15:26

Report to Moderator

Re: Re: Re: Atlas Walk behind snowblower in reply to Herb, 12-20-2003 17:40:16

I am also looking for a spring for this machine. If you are successful finding them please advise. I will do the same.

[Log in to Reply] [No Email]

Herb

01-16-2004 18:47:06

Report to Moderator

Re: Re: Re: Re: Atlas Walk behind snowblower in reply to Anthony, 01-16-2004 09:15:26

Anthony<
The only two approaches I can think of are: 1. have someone make a few for us, but the cost may be high; and 2. try to see if any of the old repair shops have some lying around.

Herb

[Log in to Reply] [No Email]

Andy Smith

12-06-2003 10:51:27

Report to Moderator

Re: Re: Atlas Walk behind snowblower in reply to Jim, 09-08-2000 13:46:21

I also have an atlas snowblower, runs well, but my drive way has a slight incline, that causes it to shut off. anyone have a solution. btw it is a 4hp briggs, single stage, 20", pull start, model SN420A, serial # NI 1909, anyone have any info? please email me.

[Log in to Reply] [No Email]

Andy Smith

12-06-2003 10:43:09

Report to Moderator

Re: Re: Atlas Walk behind snowblower in reply to Jim, 09-08-2000 13:46:21

[Log in to Reply] [No Email]

Ira

11-25-2002 19:39:06

Report to Moderator

Re: Re: Atlas Walk behind snowblower in reply to Jim, 09-08-2000 13:46:21

What size tires does this machine have ? I have one and there are no markings on the sidewall of the tires to indicate the size.
The tires measure 9" o.d. x 5.75 " i.d x 2.75 " wide. I would like to put chains on for better
traction.

[Log in to Reply] [No Email]

MURRAY BLIGHT

11-23-2002 14:09:23

Report to Moderator

Re: Re: Atlas Walk behind snowblower in reply to Jim, 09-08-2000 13:46:21

I HAVE THE EXACT SAME MODEL SNOWBLOWER AND AM LOOKING FOR THE BRASS GEAR THAT IS IN THE FRONT IMPELLER HOUSING AS MINE IS MISSING MOST OF ITS TEETH. THIS GEAR IS THE ONLY BRASS ONE AND IS APPROX 3/4" INSIDE AND ABOUT 2" OUTSIDE. ANY INFO WOULD BE APPRECIATED.

[Log in to Reply] [No Email]

William O.Carter

09-20-2002 08:48:47

Report to Moderator

Re: Re: Atlas Walk behind snowblower in reply to Jim, 09-08-2000 13:46:21

I have an Atlas Snowblower,Model:15-5211,Serial#: E006655 with a 5hp Briggs engine. I'm looking for an operations manual.If anyone can help me out I would appreciate it. It was manufactured by Atlas Tool and MFg.Co in St.Louis,Mo. I saw where this company no longer is in business.

[Log in to Reply] [No Email]

Dave Pray

02-19-2003 13:15:17

Report to Moderator

Re: Re: Re: Atlas Walk behind snowblower in reply to William O.Carter, 09-20-2002 08:48:47

I have an Atlas Walk behind snowblower, model 60-3218. I don't have an owners manual. Can anyone help me?

[Log in to Reply] [No Email]

walt

09-26-2003 15:49:56

Report to Moderator

Re: Re: Re: Re: Atlas Walk behind snowblower in reply to Dave Pray, 02-19-2003 13:15:17

Note: I have a Atlas snow thrower 2-cycle model 15-3220 serial #F-003076. I'm in need of information where to run two wires that came loose. One is a Green wire coming from the magnito I think, and the other one is a ground to the chassie . Please answer as soon as possible. Thanks in advance.

[Log in to Reply] [No Email]

Rick Studer

02-24-2003 09:37:26

Report to Moderator

Re: Re: Re: Re: Atlas Walk behind snowblower in reply to Dave Pray, 02-19-2003 13:15:17

I have an owners manual for a model 15-5211A. I don't know if that would do you any good, but would be happy to get you a copy if you want one. But I also have a question. I need a wheel. Do you have any idea where I can get one, or any where that has service parts for older Atlas snowblowers?

[Log in to Reply] [No Email]

James Sullivan

01-03-2004 17:14:25

Report to Moderator

Re: Re: Re: Re: Re: Atlas Walk behind snowblower in reply to Rick Studer, 02-24-2003 09:37:26

Hello i also have an atlas snowblower but i have no model# or anything, do you think i could get a copy of your manual, maybe i'll get lucky and it will be the right model. thanks.

[Log in to Reply] [No Email]

Stan

12-29-2002 12:51:07

Report to Moderator

Re: Re: Re: Atlas Walk behind snowblower in reply to William O.Carter, 09-20-2002 08:48:47

I HAVE THE IDENTICAL SNOWBLOWER. I ALSO HAVE THE OWNERS MANUAL. IT IS ONLY 8 PAGES. I COULD PHOTOCOPY IT AND MAIL IT TO YOU.

[Log in to Reply] [No Email]

Mary Hankins

01-29-2004 13:59:52

Report to Moderator

Re: Re: Re: Re: Atlas Walk behind snowblower in reply to Stan, 12-29-2002 12:51:07

The wheel that is turned by the drive belt snapped in half on my Atlas Snowblower--
model #A520ES-N
Service #--603241 (5hp--20in.)

I tried a simple glue job to no avail.

Where can I find a replacement? Someone said that Atlas was out of business. Are there parts to buy? Did someone buy them out? Mary

[Log in to Reply] [No Email]

Chris

02-03-2004 11:13:14

Report to Moderator

Re: Re: Re: Re: Re: Atlas Walk behind snowblower in reply to Mary Hankins, 01-29-2004 13:59:52

Mary - I've been looking for parts for mine as well.

MTD -- www.mtdproducts.com seems to be the only place that handles Atlas anymore.

Their number is 1-800-269-6215, and they sent me to the 'archives' dept for info on my Atlas, which is 1-800-800-7310.

good luck -
Chris

[Log in to Reply] [No Email]

Monte Scrivens

02-05-2004 18:41:14

Report to Moderator

Re: Re: Re: Re: Re: Re: Atlas Walk behind snowblow in reply to Chris, 02-03-2004 11:13:14

I have a 15-5220 Atlas. need some parts and/or manual for part #'s. Machine is also for sale if I cant get parts, someone else can have it. It currently runs, but I would like to fix it up a bit.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy