TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Ford YT 16 H

Welcome Guest, Log in or Register

Author

D.Jackson

01-04-2001 10:03:43

Report to Moderator

I'm looking for manuals or any information available for this tractor. I am also concerned about the Hydrstat. drive. It just barely engages into forward and seems to slow down after cutting lawn for a while. Reverse is fine. Is this just linkage adjustment or impending component failure ? D.J.

[Log in to Reply] [No Email]

Jim S.

03-29-2002 11:53:59

Report to Moderator

Re: Re: Re: Re: Call the police ..I stole this one in reply to Michael Soldan, 03-29-2002 05:09:32

Mike, leaving the question of religion entirely out of it, I agree with your assessment that the old gentleman was not cheated.

The fair price of any given thing is the amount that the buyer agrees to buy for, and the seller agrees to accept, at a given point in time. You and the seller reached that agreement, and neither was under duress to agree. That's what happens at auctions.

I collect IH Cub Cadets. I have seen Cub Cadet parts and accessories selling in the collector market climb in value to unreal levels when the stock market was going strong and everybody had work, then crash back to what I call reasonable levels since the economy went bad. But there are still certain items that bring many, many times their value of just a few years ago in that marketplace. It all goes back to what the seller will sell for, and what the buyer will pay, at any given point in time.

[Log in to Reply] [No Email]

Ken

01-08-2001 20:03:51

Report to Moderator

Re: Ford YT 16 H in reply to D.Jackson, 01-04-2001 10:03:43

I bought an excellent manual from a New Holland dealer for the YT-16.

[Log in to Reply] [No Email]

Pat

01-05-2001 05:31:32

Report to Moderator

Re: Ford YT 16 H in reply to D.Jackson, 01-04-2001 10:03:43

Don't know about the YT16 specifically, but I had a similar problem on a simplicity hydro unit. It would slow down uphill especially, and I found that this required tightening of the linkage to prevent the lever from slipping towards neutral when under load. It could also be old hydro fluid, which is getting too thin as it warms up. On mine, I changed the fluid (estimate it was about 15 years old) and was amazed at the difference in performance. It was much more responsive, and no longer ran away on me going downhill. If you change the fluid, just make sure to THOROUGHLY CLEAN everything around the pump before draining and refilling. Dirt in the pump will kill it quicker than anything else.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy