TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Dynamark

older needs manual

Welcome Guest, Log in or Register

Author

Tim Dalton

06-05-2003 14:20:43

Report to Moderator

I have an old dynamark with a Briggs & Stratton 11 HP motor. The Murray folks have a parts list, but no manual. Does anyone have a manual I can get a copy of? I'll pay a reasonable amount. The model number on the plate is 5188-3900, s/n 041604, code 2095. Thanks!

[Log in to Reply] [No Email]

Jared Beer

10-16-2003 20:03:49

Report to Moderator

Re: Dynamark - older needs manual in reply to Tim Dalton, 06-05-2003 14:20:43

I am in need of some help, I just took ownership of this jewel and was going to strip it and make a workhouse out of it for pushing snow and such, I'm from kansas so this would have given it a workout. Anyway I have no way of even knowing the year it was made, And I need to find a manual for the tractor, rearend everything I can get. I have started to strip and decided to make it all functional again instead sort of a new hobbie It should be a lot of fun. All I know is that its a dynamark 8hp 36" cut rider model # 5285-3300. Serial # 6-365918 that was made in Des Moines Iowa, And is has a registration # of 5023 all the original buck tags are still on the tractor and the original motor is also there 8hp 4cycle briggs and stratton. I had to tear all the wiring out so far it was shot due to mice I guess. Can anyone please help me?

[Log in to Reply] [No Email]

Ted Hann

07-15-2003 09:07:08

Report to Moderator

Re: Dynamark - older needs manual in reply to Tim Dalton, 06-05-2003 14:20:43

I am trying to locate a mower deck for a Dynamark lawn tractor,part # for this deck from my owners manual is 46324, 36 inch deck,,tractor model is as follows,,5188-9200 code 2309,,,this is a rear discharge deck,,,any help ,,,thanks!!!!

[Log in to Reply] [No Email]

Jeff Shafer

07-03-2003 04:11:26

Report to Moderator

Re: Dynamark - older needs manual in reply to Tim Dalton, 06-05-2003 14:20:43

I recenly picked up a Dynamark with the same model #. I have one problem, maybe one of you guys will have the answer. The mower will not move when it is in gear, unless I lift the backend up, then the tires spin until I apply pressure to them, then they stop. Any ideas, Thanks.

[Log in to Reply] [No Email]

Don Miller

07-29-2003 06:58:08

Report to Moderator

Re: Re: Dynamark - older needs manual in reply to Jeff Shafer, 07-03-2003 04:11:26

I have the same problem and i think i will try to replace the drive belt going from the engine to the transmission try that

[Log in to Reply] [No Email]

Nate

06-18-2003 20:03:34

Report to Moderator

Re: Dynamark - older needs manual in reply to Tim Dalton, 06-05-2003 14:20:43

Hi Tim,

I don't know if you have learned of this, yet, but I just found an area which may be of interest to you, and other owners, maybe.

Go to>Link

Nate.>Link

[Log in to Reply] [No Email]

Nate

06-16-2003 14:28:27

Report to Moderator

Re: Dynamark - older needs manual in reply to Tim Dalton, 06-05-2003 14:20:43

Hi all,

I just bought a used Dynamark 18/42 lawn tractor - of which, I was told, is at least 20 yrs old. My first call to Murray - for a manual - was fruitless. On my second call to them (initially under the impression that I had another concern which handled the Dynamark line) I made contact wih another worker who was very nice, and who had put me on hold for a very considerable period of time (I, at first, assumed that we had been disconnected)before coming back with information that she had found an operators manual & parts list - which she was going to send out to me, free of charge. Maybe the some service or repair applications will be the same, across the board, between certain models. If you can't find a manual, contact me and I will try to help all that I can, by getting some info to you.

Nate

[Log in to Reply] [No Email]

mark

07-30-2004 18:02:27

Report to Moderator

Re: Re: Dynamark - older needs manual in reply to Nate, 06-16-2003 14:28:27

I have an older dynamark lawn tractor model 5188-0300. I am looking for the part # for a spring that attaches to the mower deck that engages the mower blades. The tractor is a 10/36. Thanks

[Log in to Reply] [No Email]

Norm Marchincin

07-14-2003 13:48:27

Report to Moderator

Re: Re: Dynamark - older needs manual in reply to Nate, 06-16-2003 14:28:27

I, too need a dynamark manual, and can not locate one .Model no. 5188-3400 serial no. 131217 11HP 36" DYNAMARK 1136

[Log in to Reply] [No Email]

Ryan Olson

07-02-2003 15:49:22

Report to Moderator

Re: Re: Dynamark - older needs manual in reply to Nate, 06-16-2003 14:28:27

My dad recently bought an older Dynamark model: 3611-3401 code:6111, and the ignition switch went out. I would like to know if anyone knows either where to get a wiring diagram or a manual.

Thanks, Ryan

[Log in to Reply] [No Email]

Tim Dalton

06-16-2003 18:55:28

Report to Moderator

Re: Re: Dynamark - older needs manual in reply to Nate, 06-16-2003 14:28:27

Thanks! And thanks for reminding me about that (people being able to help)I did manage to get a parts list, and it's helpful. I have some other followups to check out, but I may get back to you.

[Log in to Reply] [No Email]

rod

06-05-2003 16:21:51

Report to Moderator

Re: Dynamark - older needs manual in reply to Tim Dalton, 06-05-2003 14:20:43

You looking for the mower manual, or the B&S manual?

[Log in to Reply] [No Email]

Tim Dalton

06-10-2003 17:10:29

Report to Moderator

Re: Re: Dynamark - older needs manual in reply to rod, 06-05-2003 16:21:51

I don't have either one. I have since learned that this is a model 1136. I mostly need the motor manual, since the mower is pretty easy to grasp. I'll gladly pay for both.

[Log in to Reply] [No Email]

billy

06-15-2003 19:08:21

Report to Moderator

Re: Re: Re: Dynamark - older needs manual in reply to Tim Dalton, 06-10-2003 17:10:29

I went to the Briggs and Stratton website and pulled down a PDF of the manual for the motor. It has most everything about maintenance etc. The only thing that I can see on the mover that is not fairly straight forward is the transmission. That I would love to get a manual on.

[Log in to Reply] [No Email]

Tim Dalton

06-16-2003 18:57:29

Report to Moderator

Re: Re: Re: Re: Dynamark - older needs manual in reply to billy, 06-15-2003 19:08:21

That's a good lead! I'll go there now. The parts list I got has some manufacturer refference for the tranny. I'll check and see what I can get for you.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy