Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

IH 1150 grinder-mixer

Welcome Guest, Log in or Register
Author 
Karl in MD

03-04-2001 22:26:59




Report to Moderator

Is anyone familiar with these? Value? Was it made by IH or outsourced? How many HP to run efficiently? What kind of capacity? TIA for any information. It's a big jump from a freebie hammermill belted to the M!




[Log in to Reply]   [No Email]
MCL in IN

03-05-2001 05:14:19




Report to Moderator
 Re: IH 1150 grinder-mixer in reply to Karl in MD, 03-04-2001 22:26:59  
IH feed grinders were Arts-Way grinders painted red. I was a parts mgr for a dealer who sold Arts-Way. I had a sheet made up of IH models and the matching AW models. It has been 5 years but it should be a match to either a 425 or 450 AW. There are a few differences in the 425 and 450 but you should know by looking in the parts book. I would go with the 425 book. The 450 is mainly just newer. The dealer will probably know also. I have seen them run by M's, 4020's, 1086's, you name it. The smaller the tractor the less likely you will damage the grinder. I wouldn't be afraid of it.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy