Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

John Deere G P

Welcome Guest, Log in or Register
Author 
John B.

10-31-1999 07:15:06




Report to Moderator


How many thoudandths clearance should there be between pistons (standard bore) and new sleeves in a cylinder wall? This is in a 1931 6 inch bore GPWT.




[Log in to Reply]   [No Email]
Pete Ellis

10-31-1999 17:58:43




Report to Moderator
 Re: John Deere G P in reply to John B., 10-31-1999 07:15:06  
That figure-not in the books, if you don.t get answer elsewhere call Greg Stephen at Stephen Equipment -303-688-3151 or use GPWT@AOL. He are the man what knows all.good souce for parts and gaskets sets for these too.



[Log in to Reply]  [No Email]
Jack Scott

03-10-2001 07:51:30




Report to Moderator
 Re: Re: John Deere G P in reply to Pete Ellis, 10-31-1999 17:58:43  
Piston clearence is built into piston. If you have a 6inch std bore Mic the piston the difference is your clearence.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy