Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

John Deere Tractors Discussion Forum
:

Unstyled A Rings

Welcome Guest, Log in or Register
Author 
Jim Rausch

09-29-2005 19:29:08




Report to Moderator

I am replacing the rings on my unstyled A that have 045 over cast deere pistons. What should the ring gap be when I put a ring in the bore to size the ring gap?? Are the rings still available from Deere?? Thanks, Jim




[Log in to Reply]   [No Email]
Mike M

09-30-2005 05:58:12




Report to Moderator
 Re: Unstyled A Rings in reply to Jim Rausch, 09-29-2005 19:29:08  
I can't remember the exact number but there is a "rule of thumb" number to go by. Try going to www.hastings.com see if that's their web site ?they have alot of good info there. I have even bought rings right from them in the past. Very pleased with their service.



[Log in to Reply]  [No Email]
Skyhawk Greg

09-30-2005 12:29:15




Report to Moderator
 Re: Unstyled A Rings in reply to Mike M, 09-30-2005 05:58:12  
If you ever want custom rings, contact Dave Otto. >Link

However, I suspect that what you are after can be obtained through John Deere.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy