Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

13.6s

Welcome Guest, Log in or Register
Author 
Scott

02-11-2002 19:41:26




Report to Moderator

How will 13.6x38s look on my late styled B?




[Log in to Reply]   [No Email]
POPPER DICK

02-13-2002 13:47:09




Report to Moderator
 Re: 13.6s in reply to Scott, 02-11-2002 19:41:26  
Scott

The model B I presently have I bought from a man in Illinois who was dying of cancer and he was selling all of his things that would be difficult for his wife to handle. It had 13-6 on the right side and 12-4 on the left side. He told me he did that for plowing and the right side was the furrow wheel. I didn't relate to this theory but didn't ask any further. I prefer the 12-4 on my B and I have 13-6 on my 620. I too feel that 13-6 is a lot of tire for the model B. But for parade duty it doesn't much matter I guess.

Dick

[Log in to Reply]  [No Email]
Clyde Scott

02-13-2002 05:21:30




Report to Moderator
 Re: 13.6s in reply to Scott, 02-11-2002 19:41:26  
I recently purchased an A that has 16.9's on it.. Talk about BIG..!! These tires are comming off this week to be replaced by 13.6's. If anyone wants these big tires, Come to south Georgia and get them. I'll give them to you..!!
Clyde Scott - Moultrie, GA.



[Log in to Reply]  [No Email]
Mike Aylward

02-12-2002 06:55:22




Report to Moderator
 Re: 13.6s in reply to Scott, 02-11-2002 19:41:26  
Scott, a 13.6 will be a lot of tire on a B. It has been and can be done, but a 12.4 will look better, especially with the rim size you will have. Hope this helps. Mike



[Log in to Reply]  [No Email]
Ron

02-12-2002 11:29:41




Report to Moderator
 Re: Re: 13.6s in reply to Mike Aylward, 02-12-2002 06:55:22  
I have 12.4's, and I have to use a lot of weight with the Co-Op loader, to have enough traction-with the 6' blade... The diameter should be ok... I think I would opt for some wider rims....like off an "A", or a "G"...to get the tread to lay flatter on the ground... Wish I had 13.6's on mine...!!!!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy