Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Massey Harris & Massey Ferguson Tractors Discussion Forum
:

Hydraulic control Valve

Welcome Guest, Log in or Register
Author 
Andy Knight

03-19-2004 19:03:09




Report to Moderator

Does anyone know where to get a 3-way valve to work the external hydraulics and lift this valve fit under the seat and has 3 levers any help would be helpful.




[Log in to Reply]   [No Email]
sibby(aus)

03-19-2004 19:58:24




Report to Moderator
 Re: Hydraulic control Valve in reply to Andy Knight, 03-19-2004 19:03:09  
andy,i have only seen units with one lever or two way spool.



[Log in to Reply]  [No Email]
aljorge

03-21-2004 10:27:55




Report to Moderator
 Re: Re: Hydraulic control Valve in reply to sibby(aus), 03-19-2004 19:58:24  

MF made a 3 valve unit for the MF 35 but you had wire the control valve open for the three point hitch and use one of 3 valve levers to work 3pt. I still have it around some place. I found another after market unit 2 valve but it didn't change the 3pt and we could have top and tilt,



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy