TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Minneapolis Moline Tractors Discussion Forum

G engine

Welcome Guest, Log in or Register

Author

Ben

06-08-2004 19:09:17

Report to Moderator

What waqs the bore and stroke of the g series engine

[Log in to Reply] [No Email]

Kelvin

06-08-2004 19:49:27

Report to Moderator

Re: G engine in reply to Ben, 06-08-2004 19:09:17

The problem is the word "series"

Most gas had 4 cyl. 403 cu in 4-5/8 bore x 6" stroke there was probably at least 20 hp difference between the first 4 cyl. GT and the last 4 cyl. GB.

The GTC had a 4 cyl 336(?) engine, if I'm not mistaken, don't know bore and stroke.

The GB diesel had 6 cylinders, so it was different displacement, too. probably 425 cu. in.

this also doesn't take into account the later GVI, the G704,5,6,7,8, or the G1000 G900(?), G950, G1050, G1355. And maybe a few others I missed.

[Log in to Reply] [No Email]

Mopower

06-09-2004 04:24:02

Report to Moderator

Re: Re: G engine in reply to Kelvin, 06-08-2004 19:49:27

The GTC used a 340 engine. It had the tall blocks but the bore was smaller. 4.25x6 engine. We have one in our UB. The 340 was also used in a UMIL and a few UTIs but few people know that. I have never heard what correct h.p. for a 340 should be but ours pulls pretty well and sounds really neat. The 336 was the 5-star diesel or M5gas/diesel engine at 4.625x5 bore and stroke.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy