TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

2N won't start

Welcome Guest, Log in or Register

Author

paul

06-08-2000 15:50:57

Report to Moderator

My 2N stopped running and won't restart. Here's what I've done so far:

1. Checked, regapped and reinstalled plugs and point. I get spark.
2. Removed, cleaned and reinstalled carb.
3. Removed head. Had it magnafluxed, trued and put down new gasket.

Still, when I crank it, I get the same results: No ignition, no fuel on the plugs, BUT pleanty of gas in the intake throat. What seems to be happening is that the fuel isn't being sucked up the intake. Yet I have excellent compression, I can hold my hand over the manifold intake pipe and it will be sucked up the pipe! If I remove the exhaust pipe and crank it, I get white vapor. I THINK it fired twice on the last go-round, but that was it. Where do I go from here?

[Log in to Reply] [No Email]

Bob (KY)

06-08-2000 18:30:31

Report to Moderator

Re: 2N won't start in reply to paul, 06-08-2000 15:50:57

Try installing new plugs. The old ones can still show what seems to be good spark, but ain't working right. I had close to the same problem with my 2N. I had some good looking plugs laying around, installed them and had good spark but tractor missed something terrible. I tried a lot of stuff that didn't work. Installed new plugs and everything is fine.

[Log in to Reply] [No Email]

Kim

06-08-2000 18:03:55

Report to Moderator

Re: 2N won't start in reply to paul, 06-08-2000 15:50:57

Testing, please ignore.

[Log in to Reply] [No Email]

Kim

06-08-2000 17:43:25

Report to Moderator

Re: 2N won't start in reply to paul, 06-08-2000 15:50:57

This is Kim with a test reply. Please ignore, thanks and sorry for interupting.

Kim

[Log in to Reply] [No Email]

Kim

06-08-2000 17:41:25

Report to Moderator

Re: 2N won't start in reply to paul, 06-08-2000 15:50:57

This is Kim with a test reply. Please ignore, thanks and sorry for interupting.

Kim

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy