TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Finished!

Welcome Guest, Log in or Register

Author

Sam (Mo.)

08-11-2000 15:16:16

Report to Moderator

I got the lights working, touched up a couple of spots on the paint, and FINISHED working on 8N #515088 this afternoon! It's the end of a project that lasted 2 or 3 years, off and on. Here's a couple of photos - and no, I didn't paint the seat red. That's a new seat cushion I treated myself to today.

[Log in to Reply] [No Email]

steve 19438

08-12-2000 16:11:20

Report to Moderator

Re: Finished! in reply to Sam (Mo.), 08-11-2000 15:16:16

fine lookin mo-chine !!!!! !!!!! !!!!

[Log in to Reply] [No Email]

dale b

08-12-2000 07:49:01

Report to Moderator

Re: Finished! in reply to Sam (Mo.), 08-11-2000 15:16:16

sam. you did a great job on your tractor. doing it yourself gives you a sence of pride. try not to get her too dirty, ha ha
dale b
ontario canada

[Log in to Reply] [No Email]

Chuck (CA)

08-11-2000 22:07:08

Report to Moderator

Re: Finished! in reply to Sam (Mo.), 08-11-2000 15:16:16

You sure have a right to be proud, Sam..It's beautiful. Now, ya gotta do something with that King Kutter mower. Kinda makes you think of wearing a tuxedo with tennis shoes. :-)
Chuck (CA)

[Log in to Reply] [No Email]

Dave Todd

08-11-2000 20:15:43

Report to Moderator

Re: Finished! in reply to Sam (Mo.), 08-11-2000 15:16:16

Looks great!!! Wish I was done with mine, but it's gonna be a few more years. You did a fine job on the ol girl!!!
Dave

[Log in to Reply] [No Email]

Mike G (Va)

08-11-2000 18:56:37

Report to Moderator

Re: Finished! in reply to Sam (Mo.), 08-11-2000 15:16:16

Fantastic job!!!! My 8N is still in pieces and our show is only two weeks away. Yikes!!!!! ! Got to go, alot of work to do.
brs
Mike G - 8N300465

[Log in to Reply] [No Email]

dave#1

08-11-2000 18:26:34

Report to Moderator

Re: Finished! in reply to Sam (Mo.), 08-11-2000 15:16:16

Very nice Sam,ya did a nice job

Thanks for shareing with us !

later,dave

[Log in to Reply] [No Email]

Gaspump

08-11-2000 17:44:22

Report to Moderator

Re: Finished! in reply to Sam (Mo.), 08-11-2000 15:16:16

That is a job well done! Congratulations on the completion of great looking 8N.

[Log in to Reply] [No Email]

Bob (KY)

08-11-2000 17:19:11

Report to Moderator

Re: Finished! in reply to Sam (Mo.), 08-11-2000 15:16:16

GOOOOD LOOKIN' tractor. CONGRATULATIONS!!! Now you can sit back awhile and SMILE!!!

[Log in to Reply] [No Email]

08-11-2000 16:34:48

Report to Moderator

Re: Finished! in reply to Sam (Mo.), 08-11-2000 15:16:16

Finished.... I dont think so. Aint this just the start? Thats a great looking tractor,Sam. You can come on over and help with my 2N anytime.

Congratulations

Zeke

[Log in to Reply] [No Email]

Mike OH

08-11-2000 15:44:16

Report to Moderator

Re: Finished! in reply to Sam (Mo.), 08-11-2000 15:16:16

Nice job Sam! You can be proud of what you have done. And to think it only took you 2 to 3 years. I've been working on mine for the last 30 and there is no end in sight. ;>) Mike

[Log in to Reply] [No Email]

The First Job - Sam (Mo.)

08-11-2000 15:27:34

Report to Moderator

Re: Finished! in reply to Sam (Mo.), 08-11-2000 15:16:16

Now that I've got it done, I already used the "new" tractor for a job - pulling the bass boat out of the barn. I'm tired of sanding Bondo, and by golly, I'm going fishing!

[Log in to Reply] [No Email]

Dale O'9N

08-11-2000 15:46:26

Report to Moderator

Re: Re: Finished! in reply to The First Job - Sam (Mo.), 08-11-2000 15:27:34

Now that looks great. Not the tractor, the tracker. The Bass tracker. The first pictures had me wanting to come out and take a look. Now I'm quite sure I'm bring'n my rods and tackle box. The bass love the jitterbug at night here in central VA. It's OK to talk about the boat since you had the N hooked up to it. Great idea. Now we can talk about anything, as long as we can either pull, push, or run over it with the N. Have fun. Dale in VA.

[Log in to Reply] [No Email]

8n64something

08-11-2000 17:42:41

Report to Moderator

Re: Re: Re: Finished! in reply to Dale O'9N, 08-11-2000 15:46:26

so now we can talk about wives?

Greg in NJ

[Log in to Reply] [No Email]

Dale O'9N

08-11-2000 19:15:32

Report to Moderator

Re: Re: Re: Re: Finished! in reply to 8n64something, 08-11-2000 17:42:41

Not til I see one sitting on the N. Then we can let it go. But be careful, They can read.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy