TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Found some 10x24 original hat rims with centers

Welcome Guest, Log in or Register

Author

Old Ag

09-08-2000 12:24:29

Report to Moderator

Let me know if anyone is interested. I didn't need them, so I left the tractor for scrap. These are rusty on the outside but structurally sound - no rust out in the middle that I could tell. The guy who owns it would probably take $100 for both, not sure.

Old Ag
41 9N

[Log in to Reply] [No Email]

Scot

09-08-2000 18:37:59

Report to Moderator

Re: Found some 10x24 original hat rims with centers in reply to Old Ag, 09-08-2000 12:24:29

Where are you/they located? Are they 8 or 9N?

[Log in to Reply] [No Email]

Old Ag...9N for sure

09-08-2000 20:40:07

Report to Moderator

Re: Re: Found some 10x24 original hat rims with centers in reply to Scot, 09-08-2000 18:37:59

[Log in to Reply] [No Email]

9n'er

09-08-2000 17:21:30

Report to Moderator

Re: Found some 10x24 original hat rims with centers in reply to Old Ag, 09-08-2000 12:24:29

hi Old Ag...are they 10-24's or 10-28's ? If 10-28's I'll e-mail ya...what's you e-mail address? 9n'er

[Log in to Reply] [No Email]

Old Ag

09-08-2000 20:35:54

Report to Moderator

Re: Re: Found some 10x24 original hat rims with centers in reply to 9n'er, 09-08-2000 17:21:30

9N'er:

I knew their were 8x32 and 10x(20 something), and these rims had tires with the last number as 24. Their in Friendswood, TX. I think the old junk tractor is going to change hands this weekend, but the buyer is going to scrap it, I think. Email me and I'll put you in touch with the owner(s). The outer rims seem to be solid, although the surface is rusted and flaky. At least one of the six holes that attach the center to the hub is elongated slightly. One last thing, the outer rim is not the type with loops, it has the solid ring that attaches the two parts of the rim together. I have the type with loops on my tractor. They may not be totally original, but I understand the loops were an improvement over the original and they make my N look original enough to the naked eye. Its a worker, not a looker. Take care.

Old Ag
41 9N

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy