TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Ford 9N, 2N & 8N Discussion Forum

last try,for the picture,

Welcome Guest, Log in or Register

Author

pat

09-26-2003 15:38:36

Report to Moderator

this is it, I cant figure it out, but that is the way my whole day has been going, went outside and wanted to start my 9n that I had the battery charging for like 2 weeks, I figured I would go out and put the battery in start here and go,, was out of gas, no problem I have some, got it, put about 2 gallons in enough to get me around,, try to start ,, no start.. something dont smell right.. DIESEL,, ughhhhh h,, drain it,, go on to something else,,, and then,,,,, ,,,,, , ever have one of those days, I am today,, but hey tommorows another day,, going to an auction ,, that will have to be better,, pat

[Log in to Reply] [No Email]

Hobo,NC

09-26-2003 17:01:33

Report to Moderator

Re: last try,for the picture, in reply to pat, 09-26-2003 15:38:36

http://www.ytmag.com//nboard/messages/382020.html

try this

Link

[Log in to Reply] [No Email]

maplehillfrm,pat great l

09-26-2003 15:42:33

Report to Moderator

Re: last try,for the picture, in reply to pat, 09-26-2003 15:38:36

I think I got it now, let me know, but it is huge,, sorry guys, now what wa sthat question??? it was so long ago,, oh yea the manifold vacuum, thanks ,thats what I thought it was, the manifold needs to be replaced ,it has a crack in it,, and the bracket on the lft side of the tractor undere the bent radius arm,that has to be replaced, is that bracket maybe a side mower?? something had to be heavy tho to bend the arm?? thanks for the patience/Pat

[Log in to Reply] [No Email]

souNdguy

09-26-2003 21:37:37

Report to Moderator

Re: Re: last try,for the picture, in reply to maplehillfrm,pat great l, 09-26-2003 15:42:33

Radious rods are actually fairly easy to bend.. usually happens when you hit something with one side of the front end.. like a tree, stump, rock.. wifes car.. etc.

Soundguy

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy