Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Ford 9N, 2N & 8N Discussion Forum
:

Hydraulic pump blowed gastet

Welcome Guest, Log in or Register
Author 
Archie in KY

12-06-2003 06:33:31




Report to Moderator

I bought a 8n that the hyd.would not work,Took it apart and the gastet was blowed on the one side under the value chamber. Replaced the gastet and put in new safety relief value and put it back together.Hydraulic worked for one minute and stopped again..... ..Could it be a value in value chamber not working..... .... What do I look for????? ????? ?I have not had a chamber apart,,,,, ,,,,,How do they come apart????? ???? THANK Archie

[Log in to Reply]   [No Email]
KCM

12-08-2003 06:30:50




Report to Moderator
 Re: Hydraulic pump blowed gastet in reply to Archie in KY, 12-06-2003 06:33:31  
Before diving into the pump, buy an I&T (Implement and Tractor) FO-4 shop repair manual, available from most places that sell parts. It has a very detailed description, adjustment, and repair procedures for the tractor, including the pump.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy