Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Ford 9N, 2N & 8N Discussion Forum
:

Fixed my 12 volt conversion

Welcome Guest, Log in or Register
Author 
rhKirk

05-19-2004 10:24:13




Report to Moderator

My 1 wire 12 volt conversion has not been working. Someone else did teh work and it always looked wrong to me. After reading a lot of 12 volt posts lately I finally got a grasp on the electrical parts of mmy 8n. I changed/added a few wires to make it a 3 wire and now it works great. Thanks a million guys!

Kirk




[Log in to Reply]   [No Email]
Lee

05-19-2004 10:42:09




Report to Moderator
 Re: Fixed my 12 volt conversion in reply to rhKirk, 05-19-2004 10:24:13  
Congratulations. It's a good feeling when you finally figure out a persistant problem and fix it.
Good Job, Lee



[Log in to Reply]  [No Email]
Bob

05-19-2004 10:36:03




Report to Moderator
 Re: Fixed my 12 volt conversion in reply to rhKirk, 05-19-2004 10:24:13  
The three wire setup is so simple I always wonder why guys mess around with the one-wire system.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy