TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Ford 9N, 2N & 8N Discussion Forum

Zane's Live Thang - It's a Great Thang!

Welcome Guest, Log in or Register

Author

Patrick/N-Tiques/OR

03-21-2005 19:23:44

Report to Moderator

I bought Zane's Live Thang and installed it last weekend. It works great! I was out with the rotary mower this afternoon and found the value.

I got bogged down. Instead of clutching, putting the tractor in neutral, turning off the PTO, unhooking the drive line, turning on the PTO and then raising the mower out of the muck, all I had to do was clutch it and pull up on the quadrant handle. It came right up and I was on my way.

I can see a lot of other good things for this like turning off the drive line on the mower and still being able to travel with the lift up.

I had a little difficulty w/ my alternator... it's fatter than a generator. But, it went together smoothly other than that.

I also bought Zane's alignment tool. Now my lift works perfectly in draft and position mode.

Just had to give Zane some kudos..

[Log in to Reply] [No Email]

PaulK_in_IL

03-21-2005 20:06:54

Report to Moderator

Re: Zane's Live Thang - It's a Great Thang! in reply to Patrick/N-Tiques/OR, 03-21-2005 19:23:44

I just have to throw in a plug here for one of Zane's other inventions. I installed his original Zane Thang on my 2N in about 10 minutes and I love it. True position control on the 9N and 2N is a true thing of beauty with this product.

Paul K

[Log in to Reply] [No Email]

gahorN

03-22-2005 07:20:36

Report to Moderator

Re: Zane's Live Thang - It's a Great Thang! in reply to PaulK_in_IL, 03-21-2005 20:06:54

When I think back about how I fussed with things before the THANG I can"t believe anything ever worked to satisfaction. Zane was born too late. He"d have told Harry and Henry how to do it right the FIRST time, if he"da been "round! (Young whipper-snapper!);�

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy