Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Ford 9N, 2N & 8N Discussion Forum
:

hood tin

Welcome Guest, Log in or Register
Author 
rpolcynsr

06-20-2005 14:57:33




Report to Moderator

I have a few dents in my 9N hood. This is tough steel. Anybody have a way to pound out some dents in the front?




[Log in to Reply]   [No Email]
souNdguy

06-21-2005 05:26:14




Report to Moderator
 Re: hood tin in reply to rpolcynsr, 06-20-2005 14:57:33  
All the old fashioned ways still work.. get a wood block.. beat and rub the dent out from the back... then use skim coat of filler..

The usual tools are a ball peen hammer.. rubber mallet, etc.

some people like to use slide hammers / dent pullers, etc.. or suction cups on some stuff... course.. this metal is so thick.. most dents are beyond the pop-out/suction cup deal.

Soundguy



[Log in to Reply]  [No Email]
BobOH

06-20-2005 18:49:23




Report to Moderator
 Re: hood tin in reply to rpolcynsr, 06-20-2005 14:57:33  
I used a small hammer and filled with body filler and sand smooth.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy