Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Ford 9N, 2N & 8N Discussion Forum
:

VIKER HYDRAULIC LOADER PUMP

Welcome Guest, Log in or Register
Author 
RAVI

05-13-2006 17:13:51




Report to Moderator

I am rebuilding a vicker hydraulic pump. I would like to know about how many gallons per minute it flows ? It will be used for a Ford 19-201 loader, This pump is a vane pump. I noticed the vanes that slide out due to centrifical force are curved at the ends that touch the chamber wall. Could I flip over these vanes ? So that a nice sharp edge will touch the wall ?
Thanks.




[Log in to Reply]   [No Email]
old

05-13-2006 18:06:08




Report to Moderator
 Re: VIKER HYDRAULIC LOADER PUMP in reply to RAVI, 05-13-2006 17:13:51  
GPM of most of them is around 8 GPM. As far as rebuilding one, I have tried and had no luck doing so. Yes you can flip the vanes but most of the time it doesn't work. Last time I checked the rebuild kit for one cost about $100 more then a new pump. BTDT to many times. Shoot I have 4 or 5 of the old pumps laying around in my shop.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy