TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Ford 9N, 2N & 8N Discussion Forum

2n front wheels

Welcome Guest, Log in or Register

Author

44'N-Keith

02-02-2007 08:34:24

Report to Moderator

I have a 2N, i would like to purchase 16" front rims that have the large bolt pattern like the orignal 9n/2n hub. I have seen parts retailers that have the 19" rim availble, but not the 16" rim. Anyone know where i can get them? i know they exsist becasue i have seen pictures of them here on this forum. Thanks... Keith

[Log in to Reply] [No Email]

HowieNJ

02-03-2007 03:16:40

Report to Moderator

Re: 2n front wheels in reply to 44'N-Keith, 02-02-2007 08:34:24

the older volks wagons rims are a perfect fit. if your near nj i have a pair you can have they are 16"

[Log in to Reply] [No Email]

Jim.UT

02-02-2007 17:41:16

Report to Moderator

Re: 2n front wheels in reply to 44'N-Keith, 02-02-2007 08:34:24

I have a pair of 2N front wheels that have been cut down to accept 15" tires. They are very well made, but not factory. They're available if you're interested. Email me for photos.

[Log in to Reply] [No Email]

ronald9

02-02-2007 17:11:32

Report to Moderator

Re: 2n front wheels in reply to 44'N-Keith, 02-02-2007 08:34:24

i have all rims for 8n9n2n naa 600

[Log in to Reply] [No Email]

OH Boy

02-02-2007 12:54:31

Report to Moderator

Re: 2n front wheels in reply to 44'N-Keith, 02-02-2007 08:34:24

Hi Keith,

My 5.50X16 front wheels on my 2N are in poor condition too. I have not been able to find a source to buy a factory-made 16 inch wheel, either.

The majority of the wheels you see like this are rims where the 'center' has been cut out of a 19 inch rim and then welded into the wheel part of a 16 inch rim.

I did buy a pair of these rims last summer (from a guy on this board) that appear to be factory made. They are rusted out around the valve stem hole, though. I will have to repair that by welding in some new metal.

I agree with the other poster who advised its easier to put 8N hubs on it, then you can find all kinds of wheels that will fit it.

[Log in to Reply] [No Email]

don b

02-02-2007 12:30:29

Report to Moderator

Re: 2n front wheels in reply to 44'N-Keith, 02-02-2007 08:34:24

Keith.....you can change the hubs and go with 8n hubs.Then you can find all the rims you want.This may be what you have seen on the board. don b

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy