Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Ford 9N, 2N & 8N Discussion Forum
Order Ford 8N Parts Online

1951 8N vavle guide question

Welcome Guest, Log in or Register
Author 
old

10-09-2007 10:52:15




Report to Moderator

On the guides are there o-ring sort of things or not. The book doesn't show a picture of the guide and I need to know if there is or isn't a o-ring that goes on them. Also the gasket kit I got only has 4 o-rings that could fit on the guides so is it that the intakes get them and the exhaust don't?? I have one guide to install since when a valve broke it messed up guide, valve, and keeps so I got the whole assembly but need to know if I need an o-ring on it by the way its an exhaust valve.
Thanks
And yes I'm going to lap the valve before installing it

[Log in to Reply]   [No Email]
TheOldHokie

10-09-2007 11:04:18




Report to Moderator
 Re: 1951 8N vavle guide question in reply to old, 10-09-2007 10:52:15  
Seals on the intake guides - not needed on the exhausts.

TOH



[Log in to Reply]  [No Email]
soundguy

10-09-2007 11:03:41




Report to Moderator
 Re: 1951 8N vavle guide question in reply to old, 10-09-2007 10:52:15  
seals on intake only.. not on exhaust.

soundguy



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy