TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Ford 9N, 2N & 8N Discussion Forum

HELP- yt 12 volt conversion help needed

Welcome Guest, Log in or Register

Author

8n 9n

10-28-2007 07:19:56

Report to Moderator

Hi, can someone help me out by pointing me in the right direction or scan onto the comptuter what the instructions for the 12 volt conversion looked like, mine have gone missing. Thanks, Ben

[Log in to Reply] [No Email]

Dunk

10-28-2007 10:50:11

Report to Moderator

Re: HELP- yt 12 volt conversion help needed in reply to old, 10-28-2007 07:19:56

Here is another one I ran across at some time...,

Link

[Log in to Reply] [No Email]

Tom N MS

10-28-2007 09:48:37

Report to Moderator

Re: HELP- yt 12 volt conversion help needed in reply to 8n 9n, 10-28-2007 07:19:56

Link

[Log in to Reply] [No Email]

Peter, Covington, LA

10-28-2007 09:07:37

Report to Moderator

Re: HELP- yt 12 volt conversion help needed in reply to 8n 9n, 10-28-2007 07:19:56

The 12-volt conversion on my 9N tractor (done before I got it) looks simple.

The generator is replaced by an alternator, which required a change in the mounting bracket. The alternator has a built-in regulator. The one used is a 1980's Chevy Pickup alternator, and it has a 1-wire output. There is a jumper wire on it, which is essential, and a diode in the line whose white band is oriented toward the alternator.

The coil was changed to a 12-volt model, but I understand 6-volt coils can be used with the proper resistor.

The starter appears to be original, 6-volt, but I can't be sure.

There are no lights on my tractor, so bulbs didn't need to be changed.

Of course, the battery was changed, and the new one doesn't fit the original hold-down, so a bungee cord holds it in place.

As far as I can tell, that's it.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy