TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Good deal?

Welcome Guest, Log in or Register

Author

GunPilot

12-20-2007 19:35:02

Report to Moderator

9nI02535, not stuck but not running, needs resTLC, Sherman hi-lo, 6' 3-point blade, 5' brush hog, $500?
It's a tired little girl but solid, outer rims are shot due to calcium chloride, pretty good tin but no doglegs. Looks like original lights - hard to tell.
Pusher fan, I-beam radius arms, someone hs converted to running boards and both brakes on the right/clutch on the left.

Said it needs a dizzy to run. Should Santa bring this lot home?

Am I crazy?

[Log in to Reply] [No Email]

Sean (TX)

12-21-2007 16:05:01

Report to Moderator

Re: Good deal? in reply to Steve Elings, 12-20-2007 19:35:02

Nice pics!!! Is that a beer holder on the left side of the hood? third party image

I wonder if the right rear is a original tire?...Sure looks like the tread they had...

[Log in to Reply] [No Email]

GunPilot

12-21-2007 15:58:51

Report to Moderator

Re: Good deal? in reply to Jimmyjack, 12-20-2007 19:35:02

Lol no, her name is already TinkerBelle.

[Log in to Reply] [No Email]

Sean (TX)

12-21-2007 15:56:10

Report to Moderator

Re: Good deal? in reply to Steve Elings, 12-20-2007 19:35:02

Nice

Should clean up... Going to name it 1 lamp.... third party image

Looks like your hooked...N #2 third party image

[Log in to Reply] [No Email]

GunPilot

12-21-2007 15:45:31

Report to Moderator

Re: Good deal? in reply to tcarlson, 12-20-2007 19:35:02

It's mine

Here's the little girl:

third party image

The brakes: looks like some farmer fab but works pretty well.
third party image

I put up an image gallery of about 30 pictures here: 2N Gallery Here

Click on the thumbnail to get a 800x600. Click on the 800x600 to get the full 4 megapixel image.

[Log in to Reply] [No Email]

Sean (TX)

12-21-2007 14:52:00

Report to Moderator

Re: Good deal? in reply to Hobo,NC, 12-20-2007 19:35:02

Price is right...It would be on my trailer right now...I would like to see some pic's of the brake setup...I like it third party image

Brakes all on the right side third party image

[Log in to Reply] [No Email]

Jim WestTN

12-21-2007 09:22:19

Report to Moderator

Re: Good deal? in reply to GunPilot, 12-20-2007 19:35:02

If the serial number is 9NI02535 it is a 1942 2N.
1942 2N serial numbers were 9N99047 to 9NI05411.
Is a good deal!!

[Log in to Reply] [No Email]

Mark Pearce

12-20-2007 21:28:27

Report to Moderator

Re: Good deal? in reply to GunPilot, 12-20-2007 19:35:02

Gun,

The sherman if in good shape is worth a grand on ebay. If you just bring it home and part it out you could get about 2500.00 for it. That"s if the motor has no cracks. I wouldn"t have walked away without handing the guy five hunnerd. But now since you done walked off at least for kicks see if he will take four hunnerd for it. Then send me fifty bucks for consultation fee. ;) Go git that thang now before it"s too late!!!!! !!

Mark.....

[Log in to Reply] [No Email]

GunPilot

12-20-2007 21:27:44

Report to Moderator

Re: Good deal? in reply to woodie, 12-20-2007 19:35:02

soundguy said: (quoted from post at 23:05:28 12/20/07) I read that as it had been converted to running boards, AND that it also had both brakes on the right side. not that it had been converted to running boards, AND converted to both brakes on the right side.

Since 8n have running boards and brakes on the right side.. see where the confusion comes in.

I hope the electrics are in good order on that machine.. if you get it..

soundguy

Not so lucky there. It has a homemade 12v conversion on it and various toggle switches in the dash to get it to run. My guess is that's why she's not presently running. He said he was running it and it shut off, and he left it where it stopped. A local 'expert' told him the distributor 'burned up' due to no fan shroud third party image

Probably smoked the 6v coil with that 12 setup or suchlike.

[Log in to Reply] [No Email]

soundguy

12-21-2007 09:44:01

Report to Moderator

Re: Good deal? in reply to GunPilot, 12-20-2007 21:27:44

The distrib din't burn up due to lack of fan shoroud.. however an improperly implemented 12v conversion could have deffinately let the smoke out of a few things.. real easy to check though.. and verify / fix.. unles it was a nuclear meltdown I wouldn't think the distribuitor is physically damaged, beyond some 'wear' aprts.. etc.

soundguy

[Log in to Reply] [No Email]

GunPilot

12-20-2007 20:46:28

Report to Moderator

Re: Good deal? in reply to Bob, 12-20-2007 19:35:02

soundguy said: (quoted from post at 22:27:54 12/20/07) If you knew the brake setup was not oem.. why mention that the brakes were on the right side at all ( like an 8n ).. but then omit pertinant data like : you knew it was an aftermarket kit??

Only 1 of us here on this forum is a mind reader.. and he ain't here right now...

Soundguy

If ya re-read my first post, you'll see I said "someone has converted to running boards and both brakes on the right..." No mind reader required, just a proofreader third party image

[Log in to Reply] [No Email]

soundguy

12-20-2007 21:05:28

Report to Moderator

Re: Good deal? in reply to GunPilot, 12-20-2007 20:46:28

I read that as it had been converted to running boards, AND that it also had both brakes on the right side. not that it had been converted to running boards, AND converted to both brakes on the right side.

Since 8n have running boards and brakes on the right side.. see where the confusion comes in.

I hope the electrics are in good order on that machine.. if you get it..

soundguy

[Log in to Reply] [No Email]

old

12-20-2007 20:40:26

Report to Moderator

Re: Good deal? in reply to GunPilot, 12-20-2007 19:35:02

Well if you have the $$ then why don't you have it yesterday. Just the hog is probably worth %250 so from there you only have $250 in it and thats just one or 2 parts. Plus the sherman is worth $500 or more

[Log in to Reply] [No Email]

GunPilot

12-20-2007 20:22:47

Report to Moderator

Re: Good deal? in reply to Jack - Illinois, 12-20-2007 19:35:02

No, it's all 9N. At some point someone converted it with some kind of kit setup. I'll take some pics when I get it. The question was really retorical - it's a no brainer for me. It's about 500 yards from my house (I just moved) which is a pleasant change from my usual 1000+ mile trips to get stuff.

[Log in to Reply] [No Email]

soundguy

12-20-2007 20:27:54

Report to Moderator

Re: Good deal? in reply to GunPilot, 12-20-2007 20:22:47

If you knew the brake setup was not oem.. why mention that the brakes were on the right side at all ( like an 8n ).. but then omit pertinant data like : you knew it was an aftermarket kit??

Only 1 of us here on this forum is a mind reader.. and he ain't here right now...

Soundguy

[Log in to Reply] [No Email]

Bob

12-20-2007 20:15:38

Report to Moderator

Re: Good deal? in reply to GunPilot, 12-20-2007 19:35:02

YES!!!

How much *@#& would $500.00 buy at Waldo chinaWorld, and how much of it would still be functioning at nearly 70 years old???

[Log in to Reply] [No Email]

carl pa

12-20-2007 20:14:34

Report to Moderator

Re: Good deal? in reply to GunPilot, 12-20-2007 19:35:02

good deal!!!!
if you turn it down, let me know
thanx
carl

[Log in to Reply] [No Email]

jimNCal

12-20-2007 19:41:48

Report to Moderator

Re: Good deal? in reply to GunPilot, 12-20-2007 19:35:02

The Sherman and implements are worth more than the asking price. The tractor is just a sweetener on the deal. I'd go for it I saw that deal close to home.

[Log in to Reply] [No Email]

soundguy

12-20-2007 19:39:49

Report to Moderator

Re: Good deal? in reply to GunPilot, 12-20-2007 19:35:02

8ns have breaks on the right side, and 9n/2n have a break on either side.

Post a pic of what you have... you might have a hybred with a 9n/2n front end, and an 8n tranny and back.

was it 3sp+R or 4sp+R tranny?

500$ is good.. the sherman is worth more than that by itself..

soundguy

[Log in to Reply] [No Email]

Mark Pearce

12-21-2007 06:03:15

Report to Moderator

Re: Good deal? in reply to soundguy, 12-20-2007 19:39:49

Soundguy, I kinda get the hint that he doesn't want it if the breaks are not right. That could be a haggling point with the seller. Potential buyer = "Oh Darn The Breaks Are Not Right must not be original so would yah take fifty bucks for it". Seller = "No a guy came by fifteen minutes ago and he's comming back with his trailor, dun sold it!". Boy have I heard that a time or two. Last tractor I wanted to buy sat for years with no one wanting it. The second I thought and went to go look at it I was five minutes too late. It's like something gets in the air and everyone wants the same thing at the same instant. Down here in Louisiana we call it the GRee GRee. Don't mess with the GRee GRee! Hope you get it.

Mark....

[Log in to Reply] [No Email]

soundguy

12-21-2007 09:15:04

Report to Moderator

Re: Good deal? in reply to Mark Pearce, 12-21-2007 06:03:15

It's the same here in florida. Something can set with no bites on it for a year.. and if i stop and look at it, 3 other trucks pull over.

It got to the point so bad that I was missing good tractor deasl by the minute.

I remember passing a tractor ont he way to work.. was basically already late so tookt he tel # down, and called the guy asked about the tractor, all sounded good, and price was good enough to buy site unseen, as it were. I told the guy it was sold, and that i got off work ( for that shift) in about 45 minutes, left him my #, and told him I'd drop by on the way home and pay for it, and then COME BACK with my trailer.

15 minutes later the guy calls back in and said he sold it!

After that shenanigan, next time i passe done i wanted, it happened to be at a used tractor dealer.. I went ahead and paid for the thing on my credit card right when I saw it. Dealer said he'd hold it for me till I get back with my trailer.. but I said.. NO.. I'm paying now so it's mine!

Soundguy

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy