TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Ford 9N, 2N & 8N Discussion Forum

Brass Fitting

Welcome Guest, Log in or Register

Author

old_citizen

03-21-2008 16:41:23

Report to Moderator

On the side at the back of the block my 8N has a brass fitting which has a tube running to the oil filter and another tube to the oil pressure gauge. I need to buy a replacement for this fitting but I haven't been able to find it. What is this fitting called and where can I buy one?

[Log in to Reply] [No Email]

Dunk

03-22-2008 11:09:53

Report to Moderator

Re: Brass Fitting in reply to 36 coupe, 03-21-2008 16:41:23

don b said: (quoted from post at 12:52:30 03/22/08) Dunk....part number is 8n6722.As for the price,we are having them made now.We should have new ones in stock in about 30 days,with a price drop to about half the price we have to charge now.N/H is the only supplier for them at the present. don b

Thanks, don.

That's good news for a change.

[Log in to Reply] [No Email]

Dunk

03-21-2008 17:52:35

Report to Moderator

Re: Brass Fitting in reply to old_citizen, 03-21-2008 16:41:23

Letsee, a .22 Remington single shot, the same Remington rifle in a semi-auto, a .35 Marlin, a Ruger Black Hawk .357 mag W/6.5" barrel, a .380 auto.

They would have hung me...

They didn't look.

Thank God.

[Log in to Reply] [No Email]

Dunk

03-21-2008 17:47:52

Report to Moderator

Re: Brass Fitting in reply to Bruce (VA), 03-21-2008 16:41:23

Bob said: (quoted from post at 21:44:35 03/21/08) Dunk,

Whatever John's on, I WANT some!

You better share!!!

[Log in to Reply] [No Email]

Dunk

03-21-2008 17:47:11

Report to Moderator

Re: Brass Fitting in reply to Colin King, 03-21-2008 16:41:23

Bob..John,PA said: (quoted from post at 21:41:12 03/21/08) WE will need at least 5 forms of identifucation "before" we will allow YOU into OUR library.

John,PA

John!!

I have been on Pensacola NAS in the late 80s, early 90s, in my Blazer with all of my fire arms wrapped up in a quilt in the back of my Blazer (unloaded, like that would have mattered).

I wasn't leaving them home to git stole.

Anyhow, we had a wonderful tour of the museum there.

My kids grew up in Pensacola.

[Log in to Reply] [No Email]

Dunk

03-21-2008 17:26:51

Report to Moderator

Re: Brass Fitting in reply to k ohls, 03-21-2008 16:41:23

Dunkie..John,PA said: (quoted from post at 21:17:59 03/21/08) My office is coled 'till Monday sloometime?

Actually, my semi-auitomatic maile guns "scare me".

Jack Daniel says" don''t sue US"..... ..

Close call.

[Log in to Reply] [No Email]

Bob

03-21-2008 17:44:35

Report to Moderator

Re: Brass Fitting in reply to Dunk, 03-21-2008 17:26:51

Dunk,

Whatever John's on, I WANT some!

[Log in to Reply] [No Email]

Dunk

03-21-2008 16:55:27

Report to Moderator

Re: Brass Fitting in reply to old_citizen, 03-21-2008 16:41:23

It seems to get worse every year too.

It is scary, from what I have seen with some of my older relatives.

[Log in to Reply] [No Email]

Morn'N Dunk..John,PA

03-22-2008 03:51:01

Report to Moderator

Re: Brass Fitting in reply to Dunk, 03-21-2008 16:55:27

I agree. Those trips back and forth from Pensacola to up to the "farm" are gett'N pretty dangerous.

The "panhandlers" are growing in numbers. Even in the mens rooms.

Only had to dodge a muffler that came off the old car in front of me.

Back HOME. Time to open the barn doors and say "GOOD MORNING" to my 9N. Gotta start plowing and gett'N dem onions in.

Back to yas in the FALL.

Thanks to everyone for your inspirations.

HAPPY EASTER.. John,PA

[Log in to Reply] [No Email]

Dunk

03-21-2008 16:54:18

Report to Moderator

Re: Brass Fitting in reply to JMOR, 03-21-2008 16:41:23

Bob said: (quoted from post at 20:48:52 03/21/08) No, Dunk, the governor gets oil AFTER the bypass oil filter is though with it.

Thanks Bob, I do get confused now and again.

third party image

[Log in to Reply] [No Email]

don b

03-22-2008 08:52:30

Report to Moderator

Re: Brass Fitting in reply to Dunk, 03-21-2008 16:48:00

Dunk....part number is 8n6722.As for the price,we are having them made now.We should have new ones in stock in about 30 days,with a price drop to about half the price we have to charge now.N/H is the only supplier for them at the present. don b

[Log in to Reply] [No Email]

old_citizen

03-21-2008 16:57:16

Report to Moderator

Re: Brass Fitting in reply to Dunk, 03-21-2008 16:48:00

Thanks, your picture is the fitting I need. I will check it out.

[Log in to Reply] [No Email]

Bob

03-21-2008 16:47:24

Report to Moderator

Re: Brass Fitting in reply to old_citizen, 03-21-2008 16:41:23

Two choices, the NH dealer, or find a used one.

[Log in to Reply] [No Email]

Dunk

03-21-2008 16:42:45

Report to Moderator

Re: Brass Fitting in reply to GB in MT., 03-21-2008 16:41:23

old_citizen said: (quoted from post at 20:41:23 03/21/08) On the side at the back of the block my 8N has a brass fitting which has a tube running to the oil filter and another tube to the oil pressure gauge. I need to buy a replacement for this fitting but I haven't been able to find it. What is this fitting called and where can I buy one?

Does it not have another line going to the governor?

[Log in to Reply] [No Email]

Dunkie..John,PA

03-21-2008 17:17:59

Report to Moderator

Re: Brass Fitting in reply to Dunk, 03-21-2008 16:42:45

My office is coled 'till Monday sloometime?

Actually, my semi-auitomatic maile guns "scare me".

Jack Daniel says" don''t sue US"..... ..

Close call.

[Log in to Reply] [No Email]

Bob

03-21-2008 16:48:52

Report to Moderator

Re: Brass Fitting in reply to Dunk, 03-21-2008 16:42:45

No, Dunk, the governor gets oil AFTER the bypass oil filter is though with it.

[Log in to Reply] [No Email]

Bob..John,PA

03-21-2008 17:41:12

Report to Moderator

Re: Brass Fitting in reply to Bob, 03-21-2008 16:48:52

WE will need at least 5 forms of identifucation "before" we will allow YOU into OUR library.

John,PA

[Log in to Reply] [No Email]

Bob

03-21-2008 17:43:35

Report to Moderator

Re: Brass Fitting in reply to Bob..John,PA, 03-21-2008 17:41:12

SSSSHHHHH, John,..... DON'T blow my cover!

[Log in to Reply] [No Email]

OK..John,PA

03-21-2008 18:42:39

Report to Moderator

Re: Brass Fitting in reply to Bob, 03-21-2008 17:43:35

Back to the weather "GIRL".

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy