TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Stabilizer bar retainer works great

Welcome Guest, Log in or Register

Author

Dan in CO

05-01-2008 16:38:25

Report to Moderator

Jon sold me a set of stabilizer bar retainers that he designed and had tested by Gary (GB in MT). I am one of those guys who looks for any way he can to avoid bending over due to my substantial girth (beer belly). When changing out implements, it is a real PITA for me to bend down, get on one knee and pull the front pin on the stabilizer bar so they won�t dig into the ground when backing up to the next implement to be attached. With these retainers, all I have to do is raise the lift a bit and back I go, no bending & grunting! Great job Jon! I think these rings are the best thing since canned beer.

third party image

[Log in to Reply] [No Email]

high pockets

05-05-2008 09:17:35

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Hobo,NC, 05-01-2008 16:38:25

jon said: (quoted from post at 00:31:41 05/04/08)
Dan in CO said:

That is my home made ORC cover.

You orta be selling them! Pretty handy looking.

I think he should too..... .. I'd buy it. :D

[Log in to Reply] [No Email]

jon

05-03-2008 21:31:41

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Dan in CO, 05-01-2008 16:38:25

Dan in CO said:

That is my home made ORC cover.

You orta be selling them! Pretty handy looking.

[Log in to Reply] [No Email]

Dan in CO

05-03-2008 11:40:09

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Jim N.W.Mi, 05-01-2008 16:38:25

lonestarjeff said: (quoted from post at 12:07:29 05/03/08) Dan:

What is that you have bolted up around the pto?

Jeff

That is my home made ORC cover. I made it from 4" sewer pipe and a "Jonny flange" the thing that holds a toilet to the floor. Works great.

third party image

[Log in to Reply] [No Email]

lonestarjeff

05-03-2008 10:07:29

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Dan in CO, 05-01-2008 16:38:25

Dan:

What is that you have bolted up around the pto?

Jeff

[Log in to Reply] [No Email]

36 coupe

05-03-2008 02:49:26

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Dan in CO, 05-01-2008 16:38:25

A loop of hay twine works for me.

[Log in to Reply] [No Email]

Dan in CO

05-02-2008 19:10:12

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Dan in CO, 05-01-2008 16:38:25

Nope, Don't mind at all, The Beast may get a big head though.

[Log in to Reply] [No Email]

jon

05-02-2008 19:03:37

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Dan in CO, 05-01-2008 16:38:25

For those that asked or are interested, I posted an ad on YT's Photo Ads section/Tractor related Items.

Thanks to Dan CO, I hope he don't mind I used his pic!

[Log in to Reply] [No Email]

ericlb

05-02-2008 04:08:20

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Dan in CO, 05-01-2008 16:38:25

thats what i need, i been using the upper link pins and carring the link on the floorboard between impliments, pain in the rear

[Log in to Reply] [No Email]

jon

05-01-2008 18:57:19

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Dan in CO, 05-01-2008 16:38:25

Dan in CO said: I think these rings are the best thing since canned beer.

Thanks for the Kudo's Dan! I think you'll enjoy them.

[Log in to Reply] [No Email]

Hobo,NC

05-01-2008 18:53:04

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Dan in CO, 05-01-2008 16:38:25

If a man can turn a buck with a idea nuttin wrong with that,,,, I have chains connected to my linchpins and to the lift arm,,, the stabilizer bar rest rite nice on the chain,,, I did break a chain or 2 till I found a chain that would hold up,,, folks with out a welder would B chit out of luck tho so them rangs would work better for'em

[Log in to Reply] [No Email]

jon

05-01-2008 18:52:06

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Dan in CO, 05-01-2008 16:38:25

Rusty 2N said: So, What's your price??

I'm trying to get a line on a quanity price for some of the parts. I wanna sell em as reasonable as I can. Will post it in a couple days though.

I appreciate the interest.

[Log in to Reply] [No Email]

Dan in CO

05-01-2008 18:24:30

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Dan in CO, 05-01-2008 16:38:25

Yep, that is the new tire. See the other post "The Beast gets a new shoe"

[Log in to Reply] [No Email]

Sean (TX)

05-01-2008 18:17:28

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Am-Seb, 05-01-2008 16:38:25

Dan in CO said: (quoted from post at 18:38:25 05/01/08) Jon sold me a set of stabilizer bar retainers that he designed and had tested by Gary (GB in MT). I am one of those guys who looks for any way he can to avoid bending over due to my substantial girth (beer belly). When changing out implements, it is a real PITA for me to bend down, get on one knee and pull the front pin on the stabilizer bar so they won�t dig into the ground when backing up to the next implement to be attached. With these retainers, all I have to do is raise the lift a bit and back I go, no bending & grunting! Great job Jon! I think these rings are the best thing since canned beer.

That the new tire?

[Log in to Reply] [No Email]

Dan in CO

05-01-2008 18:13:20

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Sean (TX), 05-01-2008 16:38:25

Jon: You out there? maybe another customer...

[Log in to Reply] [No Email]

Dan in CO

05-01-2008 18:08:33

Report to Moderator

Re: Stabilizer bar retainer works great in reply to teddy52food, 05-01-2008 16:38:25

Sales are up? Good news both for jon and for his customers. His product is one of those I would put in the category of an "elegant solution".

[Log in to Reply] [No Email]

GB in MT.

05-01-2008 17:31:06

Report to Moderator

Re: Stabilizer bar retainer works great in reply to Dan in CO, 05-01-2008 16:38:25

Dan;
I like em' too. What I really like about them is, ya never have to remove them even if you are not using the stab. bars.

Nice piece of hardware!!!!!

Looks like sales are up too. I just got an email fron jon yesterday!!

Gary 8)

[Log in to Reply] [No Email]

Rusty 2N

05-01-2008 18:10:20

Report to Moderator

Re: Stabilizer bar retainer works great in reply to GB in MT., 05-01-2008 17:31:06

So, What's your price??

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy