TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Howard rotavator

Welcome Guest, Log in or Register

Author

marcel j barrow

05-08-1999 12:07:42

Report to Moderator

Do you carry theseor parts for them.

[Log in to Reply] [No Email]

robert moore

07-08-2005 20:08:47

Report to Moderator

Re: howard rotavator in reply to marcel j barrows, 05-08-1999 12:07:42

Howard Register contact 0268453279. see The Old Machinery Magazine issue April/ May and August/ September.
Look forward to hearing from you.

[Log in to Reply] [No Email]

Chester Hudson

08-10-2001 17:23:29

Report to Moderator

Re: howard rotavator in reply to marcel j barrows, 05-08-1999 12:07:42

I have Howard friction facings made for the Gem, Yeoman, 400, & 350. If you have a problem give me a ring for choice on (44) 07836 210363, or write to me at Heath Close, Old Heathfield, East Sussex, TN21 9BN, England. I regularly send parts overseas. I have a website www.tillerparts.com.

[Log in to Reply] [No Email]

Frank Hodel

04-09-2000 17:24:04

Report to Moderator

Re: howard rotavator in reply to marcel j barrows, 05-08-1999 12:07:42

Would like to have your phone number (toll free) if you have one.We have a Howard Rotavator need information on slip clutch. Also need to know how to take gear box off. The 4 mounting bolts are broke and need to be replaced. Would like to talk to someone that is familar with this equipment. Thank you. Will be waiting to hear from you.

Howard Rotavator HX Serial No. 1321
Model No. 820 B

[Log in to Reply] [No Email]

Steve Mundy

04-18-2000 06:12:38

Report to Moderator

Re: Re: howard rotavator in reply to Frank Hodel, 04-09-2000 17:24:04

We can supply parts for Howard Rotavaors. Please call us for information at 815-943-5401.

HR Parts

[Log in to Reply] [No Email]

JIM S.E. OH.

05-15-1999 19:47:13

Report to Moderator

Re: howard rotavator in reply to marcel j barrows, 05-08-1999 12:07:42

what do you need? or have.

[Log in to Reply] [No Email]

pete curtis

07-24-2001 19:11:27

Report to Moderator

Re: Re: howard rotavator in reply to JIM S.E. OH., 05-15-1999 19:47:13

My son-in-law has acquired a Howard Rotavator and needs a manual to help pull it down, free the piston and generally restore it. Any information would be appreciated.

[Log in to Reply] [No Email]

Jamie Allen

11-05-2000 06:40:08

Report to Moderator

Re: Re: howard rotavator in reply to JIM S.E. OH., 05-15-1999 19:47:13

I require a howard bantam in good/working order and have a 3ft scissor action brush wood cutter for sale

[Log in to Reply] [No Email]

dhiraj

09-26-2000 01:32:28

Report to Moderator

Re: Re: howard rotavator in reply to JIM S.E. OH., 05-15-1999 19:47:13

hi sir
i am student of agril.engg and in need of material regarding agri eqipments like rotavators,
cotten slashers,disposal of cotten and rotavator modifacations which will help im my project research work whicjh is realted to university academics hoping kind cooperation from u and desperately waiting for your reply on same e_mail address
--- thanking u
dhiraj

[Log in to Reply] [No Email]

Wayne Huntert

05-04-2000 11:23:05

Report to Moderator

Re: Re: howard rotavator in reply to JIM S.E. OH., 05-15-1999 19:47:13

I am looking for the cutting blades to a 5' Rotavator that may have been build in West Horndon - Essex England. This Rototiller has 42 cutting blades 21shappen on the Right side and the other 21 on the Left side. This is about all I know about this peace of equipment. It runs off a PTO unit and hooks up to a three point hook up. It also has a selecto gear box at the real of the tiller, which you can change gear speeds. Thank you for your time. If you have this idem please let me know and also the price and S&H.

[Log in to Reply] [No Email]

George Field

04-15-2000 14:58:56

Report to Moderator

Re: Re: howard rotavator in reply to JIM S.E. OH., 05-15-1999 19:47:13

Looking for magneto parts for Howard Twin. Also looking for rotar blades for the Howard Twin.

Please contact me at the above e-mail address.

[Log in to Reply] [No Email]

Steve Mundy

04-18-2000 05:51:39

Report to Moderator

Re: Re: Re: howard rotavator in reply to George Field, 04-15-2000 14:58:56

Howard Rotavator parts are available through HR Parts. Phone 815-943-5401. Very few parts for the Howard twin engine and magneto are available. Blades and most parts for the Rotavator are available.

[Log in to Reply] [No Email]

Ray Keegan

04-10-2000 14:52:09

Report to Moderator

Re: Re: howard rotavator in reply to JIM S.E. OH., 05-15-1999 19:47:13

I recently purchases an 80" Howard Rotavator in need of some repair. I have found that there is excessive ware on the splines on the two shafts in the gear box and the gears. Can you advise where I can purchase replacement parts for the rotavator.

[Log in to Reply] [No Email]

Harold Bishop

04-12-2000 19:29:56

Report to Moderator

Re: Re: Re: howard rotavator in reply to Ray Keegan, 04-10-2000 14:52:09

Looking for a good used Gear Box for a Howard Rotovator Model HL H60 Serial # 13059 or any information where I could find one. Thanks, Harold

[Log in to Reply] [No Email]

Steve Mundy

02-18-2001 17:37:43

Report to Moderator

Re: Re: Re: Re: howard rotavator in reply to Harold Bishop, 04-12-2000 19:29:56

We do not have a used gearbox assembly for the HL model Howard Rotavator, but likely have a new gearbox housing and most of the parts for the gearbox.

Howard USA Inc.
10 S. Jefferson St.
Harvard, Il 60033

Phone 815-943-5401

Steve Mundy

[Log in to Reply] [No Email]

Steve Mundy

02-18-2001 17:37:25

Report to Moderator

Re: Re: Re: Re: howard rotavator in reply to Harold Bishop, 04-12-2000 19:29:56

We do not have a used gearbox assembly for the HL model Howard Rotavator, but likely have a new gearbox housing and most of the parts for the gearbox.

Howard USA Inc.
10 S. Jefferson St.
Harvard, Il 60033

Phone 815-943-5401

Steve Mundy

[Log in to Reply] [No Email]

rick

03-30-2000 07:24:33

Report to Moderator

Re: Re: howard rotavator in reply to JIM S.E. OH., 05-15-1999 19:47:13

i have a rotavator. i need the plate that bolts to the front of it. were the pto goes in & the shaft that comes out.

[Log in to Reply] [No Email]

Luke Kukovica

11-14-2000 06:44:42

Report to Moderator

Re: Re: Re: howard rotavator in reply to rick, 03-30-2000 07:24:33

I am looking for a clutch slip plate (fiction lining) for a Howard Rotavator Gem model G 24 T

Thanks
Luke

[Log in to Reply] [No Email]

Steve Mundy

02-18-2001 17:42:21

Report to Moderator

Re: Re: Re: Re: howard rotavator in reply to Luke Kukovica, 11-14-2000 06:44:42

The clutch lining (friction disc) is Part No. 220.

For the name of a Howard distributor in your area, contact

Howard USA Inc.
10 S. Jefferson St.
Harvard, IL 60033

Phone 815-943-5401

Steve Mundy

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy