Fahr tractor Gueldner engine

A little problem has occured. On a little Fahr with a 2 cylinder Gueldner engine about 40 years ago the screws fixing the big end caps to the con rods came loose on one cylinder and the shells got up behind the cap. The crank is scored up and needs grinding and the shells need replacing.

Fine up to now, but I have dismantled the engine apart from getting the flywheel off.

It is held in place bu a sort of split cone system which needs a special threded puller to get it off.

I wonder if anyone of you has ever come across this sort of engione and or problem and can advise me at all?

I will take a photo and post it tomorrow.

Thanks very much, I look forward to a shoal of replies!!!

this one should be helpfull,too.

they should be able to help You out

Gueldner and Fahr had a cooperation about sharing components.

I.E. The Gueldner Tessin was the same tractor then the Fahr D 132 W.

The first Dieselengine from Gueldner in a Fahr You can find in 1948.

I will try the other you have suggested, thank you again very much for helping.

Pat