TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Might Mite tractor

Welcome Guest, Log in or Register

Author

Dave James

07-25-1999 08:52:07

Report to Moderator

Trying to determine if anyone is familiar with this tractor. Model #10, Serial # 2674. It was made in Dennison, Tx. Has metal front wheels and appears to have been hand-crank but converted to pull start similar to gas lawnmowers. There is a notation "Clutch Adjustment; Twin Disc Clutch Co., Racine, WI." This tractor is currently located in Southern, Va. Trying to find someone who knows anything about this tractor. Would like assess it's value.
Thanks,
DJ

[Log in to Reply] [No Email]

S. Honeycutt

07-11-2005 12:35:41

Report to Moderator

Re: Might Mite tractor in reply to Dave James, 07-25-1999 08:52:07

My husband has a Mighty Mite. He was told that it was made in 1948. There are supposed to be only 500 made in that year. There is not too much information out there on mighty mites.
It sure did draw a lot attention at the Tractor show during the 4th. Would like to know more about the mighty mite.

[Log in to Reply] [No Email]

Joy Gainer

05-11-2004 11:33:38

Report to Moderator

Re: Might Mite tractor in reply to Dave James, 07-25-1999 08:52:07

Dave (or anybody who can help) My Grandfather-in-law has a old Mighty-Mite #10 and I have been trying to get some information on it with no luck. What I am looking for is a catalog or manual on it. Some of the parts need to be replaced and I have no idea where to look!!

Any information would be great. Thanks so much.

Joy Gainer

[Log in to Reply] [No Email]

JKB

09-07-1999 11:10:40

Report to Moderator

Re: Might Mite tractor in reply to Dave James, 07-25-1999 08:52:07

The Mighty Mite was built by Jaques Power Saw Company in the late 40's and 50's. The most common engine found so far has been a Briggs and Stratton, although I am not sure if this is original. I have a Model #10, Serial #1945, with a blade mounted on the front. From what I was told, the tractor came with this blade as original equipment by the original owner. The wheels on the rear are 5 bolt, 5.5 in. Ford, 16 in. truck wheels, or from a Jeep. The front wheels are two piece steel. The transmission is a Borg-Warner three speed with reverse, the same transmission found in older Jeeps. The original color was red, much the same as the Farmall. (red paint varies from maker to maker so exact color of red is hard to determine.) To this date, I have not found any written material on this tractor, but I am still looking. I have a trip planned to Denison Texas to visit family and plan to spend time trying to find info on the company. I will put out anything I can find.

[Log in to Reply] [No Email]

Jerry Jaques

08-31-2004 08:24:33

Report to Moderator

Re: Re: Might Mite tractor in reply to JKB, 09-07-1999 11:10:40

My name is Jerry Jaques, grandson of the owner of the Jaques Power Saw Company in Dennison, TX. Feel free to contact me.

Jerry

[Log in to Reply] [No Email]

duffytruckingllc

01-28-2006 16:25:37

Report to Moderator

Re: Re: Might Mite tractor in reply to Jerry Jaques, 08-31-2004 08:24:33

a friend of mine has a Jaques Power Saw Model F. It looks like it needs a motor, but does not have one, I am looking for information about this particular saw... anyone?!?!

[Log in to Reply] [No Email]

George Phillips

06-07-2005 21:17:57

Report to Moderator

Re: Re: Might Mite tractor in reply to Jerry Jaques, 08-31-2004 08:24:33

"Fannin County Special" is a free ad "newspaper. This weeks edition lists "Auction Estate of Clayton Bateman, Sun June 12, 1PM, 219 Hwy 82 West, Sherman, TX Just west of United Rentals". One item is a "Model 14 Mighty Mite tractor" if you are still looking for one.

The ad also noted "made in Denison, Texas", which is how I came to find your posting - I'd never heard of the Mighty Mite. I'm curious as to where you are located - I'd be interested in seeing the information you have.

[Log in to Reply] [No Email]

chris

09-29-2001 17:35:22

Report to Moderator

Re: Re: Might Mite tractor in reply to JKB, 09-07-1999 11:10:40

Dear SIR,CALL ME AT 2192430371 OR WRITE EMAIL I HAVE ONE OF THESES TRACTORS WITH PAPERWORK, THANKS CHRIS

[Log in to Reply] [No Email]

Jerry Jaques

08-31-2004 08:26:58

Report to Moderator

Re: Re: Re: Might Mite tractor in reply to chris, 09-29-2001 17:35:22

By chance would you consider selling your Mighty Mite. I"m the grandson of the owner of the Jaques Power Saw Company which was located in Dennison, Tx. I would like to buy the tractor for my family.

Jerry

[Log in to Reply] [No Email]

Benny Horne

09-13-2004 14:40:43

Report to Moderator

Re: Re: Re: Might Mite tractor in reply to Jerry Jaques, 08-31-2004 08:26:58

I have a Mighty Mite model 12, serial no. 4036, with the original plow for sale. If interested let me know. I have pics. thanks , Benny

[Log in to Reply] [No Email]

Sabre

07-06-2005 18:14:16

Report to Moderator

: Might Mite tractor in reply to Benny Horne, 09-13-2004 14:40:43

I am looking for a Mighty Mite tractor to purchase as a gift for my dad. If you would like to sell, pls let me know via email or phone, 704-309-8300. Thank you!

[Log in to Reply] [No Email]

Jerry C. Jaques

06-04-2005 07:35:54

Report to Moderator

Re: Re: Re: Might Mite tractor in reply to Benny Horne, 09-13-2004 14:40:43

If you still have a Mighty Mite, please contact me via email or phone at 386-774-8878.

Jerry

[Log in to Reply] [No Email]

Rayjacks

07-23-2000 11:09:25

Report to Moderator

Re: Re: Might Mite tractor in reply to JKB, 09-07-1999 11:10:40

I need help, My father has a 47' Mighty mite tractor with the original owners manual and three different implements to go with it. He wants to get rid of it but does not know what kind of value it would have. It's a model 10. If anyone could help me I would greatly appreciate it. Thank you.

[Log in to Reply] [No Email]

Jerry Jaques

08-31-2004 08:29:29

Report to Moderator

Re: Re: Re: Might Mite tractor in reply to Rayjacks, 07-23-2000 11:09:25

I"m looking for a Mighty Mite Tractor to buy. My granfather owned the manufacturing company, Jaques Power Saw Company, that built these tractors. Would really like to get one back into the family.

Jerry

[Log in to Reply] [No Email]

carlton ochner

12-09-2002 11:03:31

Report to Moderator

Re: Re: Re: Might Mite tractor in reply to Rayjacks, 07-23-2000 11:09:25

Did you ever get a price, as I am in a similar situation?

[Log in to Reply] [No Email]

jeff barlow

08-02-1999 15:00:04

Report to Moderator

Re: Might Mite tractor in reply to Dave James, 07-25-1999 08:52:07

look on page three of this discussion board and if you need some further info contact me. I do have some stuff on the mighty mites; Thanks; Jeff

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy