Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Pulling Discussion Forum

engine builders

Welcome Guest, Log in or Register
Author 
820puller

03-17-2004 18:17:51




Report to Moderator


you have gary baker, lemmons,shipman,duke, merfield, schooler,denny's in ohio. has anybody on ths board ever heard of or ran a chads engine. if so what kind of power did it have,did it run hot, could you keep head gaskets in it,most important of all did it run out of power in low gear at all on a power track




[Log in to Reply]   [No Email]
MGUY

03-18-2004 12:10:12




Report to Moderator
 Re: engine builders in reply to 820puller, 03-17-2004 18:17:51  
why can't you just answer the question?did you personally buy anything?or just flapping your lips?
i can tell you from experience that you can not make some people happy,even if it is 2X what you told them for half the money.



[Log in to Reply]  [No Email]
Redman

03-18-2004 12:11:10




Report to Moderator
 Re: Re: engine builders in reply to MGUY, 03-18-2004 12:10:12  
ooops,that was from me.



[Log in to Reply]  [No Email]
ChadS

03-17-2004 18:27:36




Report to Moderator
 Re: engine builders in reply to 820puller, 03-17-2004 18:17:51  
Or, here is one better,, anyone ever see any of my pullers stall out dead?



[Log in to Reply]  [No Email]
MGUY

03-17-2004 18:42:20




Report to Moderator
 Re: Re: engine builders in reply to ChadS, 03-17-2004 18:27:36  
I think 820 is right you prey on people just getting started in pulling and trying to out do DENNY'S in bullsh*tting them out of their hard earned money to promote YOUR bullsh*t parts.Your spark plug theory sucks, your ethanol theroy is good PR for farmers but horsesh*t for pullers.Why don't you and DENNY'S get together instead of competeing against one another.I hope that you are able to hold your own when people want satisfaction out of the lies you tell.

[Log in to Reply]  [No Email]
a puller

03-17-2004 19:36:08




Report to Moderator
 Re: Re: Re: engine builders in reply to MGUY, 03-17-2004 18:42:20  
I don't have a problem with ChadS...if you have a good product and can build engines, let him do the advertiseing and the buyers be the critics...not people that dont' know him....I just hope that whoever you are, he stomps the guts out of your tractor at the next pull!!



[Log in to Reply]  [No Email]
ChadS

03-17-2004 19:43:38




Report to Moderator
 Re: Re: Re: Re: engine builders in reply to a puller, 03-17-2004 19:36:08  
Judging from the IP address he will be there. Right Mguy? Amamzing how we try to help people right? Hope you pull in the same classes as me, you gonna see Something Wilder go past ya!!! Chad



[Log in to Reply]  [No Email]
a puller

03-17-2004 19:59:18




Report to Moderator
 Re: Re: Re: Re: Re: engine builders in reply to ChadS, 03-17-2004 19:43:38  
someday, I would like to see a vidio of your H in action...maybe it can be put on the computer somehow and played in realplayer or windows media player?? I live about 5 hours from Ft.Wayne...so it isn't the easiest trip to a pull @1.65-1.85 a gallon!!thanks for a little support on my RPM battle thing that I have been frustrated the past 2 days over!!..lol...



[Log in to Reply]  [No Email]
ChadS

03-17-2004 20:06:44




Report to Moderator
 Re: Re: Re: Re: Re: Re: engine builders in reply to a puller, 03-17-2004 19:59:18  
Give me your address I will mail you a video!! yeah gas is expencive here too. You will be at Laotto? Come over and say hey! Watch em pull!! You won't be disapointed for a pair of H's Chad



[Log in to Reply]  [No Email]
ChadS

03-17-2004 18:55:41




Report to Moderator
 Re: Re: Re: engine builders in reply to MGUY, 03-17-2004 18:42:20  
Well, guess we will just have to wait n see. Denny will never be great again, He gets all his ideas from someone else. If ya don't belive me look in the ads in the hook. Well another thing is that if you don't use, ethanol, you never will. and never could understand what it does. PR???? NAaaa. you guys go on and pay big bucks for the big names, I don't care guys!! But one thing, the guys that do, let me build them an engine, or what have you, and we beat your crybaby A$$ on the track, we will be laughing. Why? because they mad the right choice. Am I being cocky? you betcha. So you go on, kiss the money in the hind end, us shade tree mechanics who know what it takes to win, or enjoy this sport, will be waiting to take your entry fee, or your order!!! LOL ChadS

[Log in to Reply]  [No Email]
Wild Horses

03-18-2004 10:37:19




Report to Moderator
 Re: Re: Re: Re: engine builders in reply to ChadS, 03-17-2004 18:55:41  
Ya know. I've only been pulling myself for going on 8 years, but I've been wrenching on these tractors since I was in grade school and going and watching pulls just as long. And there's nothing better that watching some small town kid with his dad's old M surprise the whole crowd or watch our stock cid M win in an open gear class. I've seen Iowa Corn Burner blow chunks twice and he just shrugs it off, never expects it to last more than one year. There's something wrong with that. I just got my M to fire after a 2 yr. build up. It's only 307 ci, but I'm already scared to death that I'll find water in the oil someday and have to start all over. To me the best engine isn't the biggest. It's the one that can pull all Saturday and go play with a plow the next fall. You guys all depend on HP, but there are plenty of the old veterans that will tell you "the motor's not the only thing that matters".
As for all you gripers, there is one good thing about this board. You can go ahead and rant and rave. We don't nesseccary have to read your messages. I wouldn't have even responded to you.
I'd don't know Chad personally, being 8 hrs away for this Laotto Pull, I doubt I will. All I have to go on is what he puts up here, and I think he's alright. He's just like the rest of us. He doesn't know everything, but he doesn't claim to either. But I think he's right more than he is wrong. There are a lot of builders out there, so what one more. No one's making you use him, are they? Go to Shipman or Murphey and buy a 1 year wonder.

[Log in to Reply]  [No Email]
ChadS

03-17-2004 18:41:27




Report to Moderator
 Re: Re: engine builders in reply to ChadS, 03-17-2004 18:27:36  
I will tell you what 820, Come on down to Laotto, come see my equipment run you decide. Heck I will even buy ya lunch. All of the above are reputable builders. I know a few of them well. seen some of them blow up, seen some that make ya go Hmmmmm mm. We all have seen em. That kind of comment makes me think that you think I have not walked the walk before... Well for those who know me, Some like me some hate me, so what. But they know one thing when I go pulling, or work on their equipment. I came to pull, and they know their tractors run good when they pull em after I work on em. 13 years of pulling for me, that is a long time for someone my age. Yeah sure most have been at it a lot longer, and I respect everyone of them as pullers, builders, and people. 15 years of working on tractors, tear down and rebuilds right and left, and working with tractors on the dyno for over 10 years. I would not trade that for anything in the world. At Laotto, I will let the tractors do the talking. And I will smile as I always do. ChadS

[Log in to Reply]  [No Email]
820puller

03-17-2004 18:53:02




Report to Moderator
 Re: Re: Re: engine builders in reply to ChadS, 03-17-2004 18:41:27  

sure would like to see this g pull at laotto if it really exists. does it pull in 9000-10000 also.



[Log in to Reply]  [No Email]
ChadS

03-17-2004 19:05:28




Report to Moderator
 Re: Re: Re: Re: engine builders in reply to 820puller, 03-17-2004 18:53:02  
never seen it that heavy. He pulls in our club and it stops at 7500# Other pulls we have gone to and met up he pulled up to 8500. Still want to see the tape? I will mail it to ya!!!! Come on now, my word is on the line here!! HA HA not that that means anything to you. One thing though, Why is it that when I talk about carbs, or anything else, no bashing, but I say one thing about building engines in this area, everyone talks sh!t!!! Call me a liar. dishonest. Well you guys have been dealing with too many crooks. I am not like that. anyone who calls me, or gets parts, or what have you gets the honest opinion, no BS, Just from what I have learned. Don't like it, don't read it. no since in tearing down a man's word just because he has an idea that works for once. Opinions are like A$$holes, every one has one. And I already know your opinion, thank you for sharing. but lunch is still on me, My magic pullers will be there at Laotto dude, Aint no pull in the back yard that I will not go to. Come on up and see em. Or just come and pull. Whatever! Chad

[Log in to Reply]  [No Email]
820puller

03-18-2004 12:55:57




Report to Moderator
 Re: Re: Re: Re: Re: engine builders in reply to ChadS, 03-17-2004 19:05:28  

you sent me an email that said this g pulls in 8500 in 4th gear an has power to spare. now you are backing away from this claim. speak the truth or knock off withthe bs.



[Log in to Reply]  [No Email]
Redman

03-18-2004 20:16:23




Report to Moderator
 Re: Re: Re: Re: Re: Re: engine builders in reply to 820puller, 03-18-2004 12:55:57  
why don't you get the tape from him?you should be able to tell from the wheel speed if his speeks the truth or not.young does not always mean less intellegent,sometimes a young person will try thing a experienced puller would never dream of and sometimes it works.



[Log in to Reply]  [No Email]
ChadS

03-18-2004 13:28:40




Report to Moderator
 Re: Re: Re: Re: Re: Re: engine builders in reply to 820puller, 03-18-2004 12:55:57  
Hey, I said the tape is here. Take me up on it. Chad



[Log in to Reply]  [No Email]
John B.

03-19-2004 09:05:18




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: engine builders in reply to ChadS, 03-18-2004 13:28:40  
Chad, are you talking about Darrells G. The guy who worked at Polks for years?



[Log in to Reply]  [No Email]
ChadS

03-20-2004 10:25:43




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: engine builders in reply to John B., 03-19-2004 09:05:18  
Yep, they call him "4th gear Darrel" Chad



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy