TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Pulling Discussion Forum

g-moline stroker

Welcome Guest, Log in or Register

Author

bud barenie

10-06-2004 19:33:37

Report to Moderator

g moline, 10a150 blocks.
question ?

what connecting rods are most people using in a 6-1/2" to 7" stroker motor ?
how are you clearing the camshaft, by just chucking it in a lathe for a small stroker, or anything past 6-1/2", does it half to be notched ?
the g-connecting rod, as far as a rod is concerned, is it a weak point in the g-motor !

if a well built g-moline , 4.81 x 6", with good compression will turn 90hp , how much does an extra 1" of stroke increase the tractors performance on the track !

looking for opinion's and suggestions

thank-you !

[Log in to Reply] [No Email]

minnie ub

10-08-2004 18:20:01

Report to Moderator

Re: g-moline stroker in reply to bud barenie, 10-06-2004 19:33:37

bud built one ourselves 4.81 and 6.75. my son and i built it and had alot of fun. email me and we'll talk.

[Log in to Reply] [No Email]

bud barenie

10-07-2004 06:08:24

Report to Moderator

Re: g-moline stroker in reply to bud barenie, 10-06-2004 19:33:37

gentlemen

thank's for the reply's. hope everyone has a sucessful winter project! can't imagine a cold winter going by without something to tinker with !

[Log in to Reply] [No Email]

Flogger

10-07-2004 09:42:37

Report to Moderator

Re: g-moline stroker in reply to bud barenie, 10-07-2004 06:08:24

LW has a G for sale, turn key, and a proven winner.

[Log in to Reply] [No Email]

JJJ

10-07-2004 10:32:01

Report to Moderator

Re: g-moline stroker in reply to Flogger, 10-07-2004 09:42:37

WELL GOOD FOR L.W.!! Are all you guys his sales personel? You all jump up and down for him!! YEAH LW, YEAH LW!!

[Log in to Reply] [No Email]

my my

10-08-2004 20:01:12

Report to Moderator

Re: g-moline stroker in reply to JJJ, 10-07-2004 10:32:01

Im sure JJJ has something to do with put-put-put.LOL LW RULES!!!!! Whoever the heck he is..... .

[Log in to Reply] [No Email]

WILDMAN

10-08-2004 08:56:07

Report to Moderator

Re: g-moline stroker in reply to JJJ, 10-07-2004 10:32:01

JUST TELLING YOU THE TRUTH ,BUT YOU BELIEVE WHAT EVER YOU WANT.

[Log in to Reply] [No Email]

Flogger

10-07-2004 13:46:36

Report to Moderator

Re: g-moline stroker in reply to JJJ, 10-07-2004 10:32:01

You seem a little sensitive there JJJ. What's a matter too much caffeine here lately?

[Log in to Reply] [No Email]

770 Puller

10-07-2004 12:39:38

Report to Moderator

Re: g-moline stroker in reply to JJJ, 10-07-2004 10:32:01

No I do not work for LW, but he does know what he is doing. If someone post that they need help I can only tell them the best possible answer. So what is your issue!

[Log in to Reply] [No Email]

BUD BARENEI

10-09-2004 08:18:47

Report to Moderator

Re: g-moline stroker in reply to 770 Puller, 10-07-2004 12:39:38

IS L.W.
LAWERANCE WILSON !
IF SO, IT'S A SMALL WORLD. JUST ACQUIRED MY FIRST ISSUE OF OLD POWER PRIDE, SEEN THEIR ADD ON THE BACK !!!

TALKED TO HIS SON !!!!!

[Log in to Reply] [No Email]

WILDMAN

10-07-2004 05:14:11

Report to Moderator

Re: g-moline stroker in reply to bud barenie, 10-06-2004 19:33:37

CALL LW AT 910-673-3505 HE HAS A G THAT IS REAL STOUT, AND CAN BUILD OR TELL YOU WHAT YOU NEED.

[Log in to Reply] [No Email]

Mopower

10-07-2004 05:09:12

Report to Moderator

Re: g-moline stroker in reply to bud barenie, 10-06-2004 19:33:37

Bud, I'll send you an e-mail. I can get you very reliable advice and information on BIG M-M strokers.

[Log in to Reply] [No Email]

770 Puller

10-06-2004 20:13:10

Report to Moderator

Re: g-moline stroker in reply to bud barenie, 10-06-2004 19:33:37

LW can make one for you!

[Log in to Reply] [No Email]

BUD BARENIE

10-07-2004 17:43:36

Report to Moderator

Re: g-moline stroker in reply to 770 Puller, 10-06-2004 20:13:10

I'LL GIVE LW A PHONE CALL !
I'VE GOT A WHILE TO BUILD THIS THING, I'M NOT VERY SMART, WOULD RATHER BUILD IT TWICE TO GET ONE RIGHT !

I THINK 70 PERCENT OF THE FUN IS WHAT YOU'VE CREATED, (WITH GOOD ADVISE), ON YOUR OWN !! THEIR'S TOO MANY GUY'S OUT HERE WITH A TON OF KNOWLEDGE, NOT TO USE THEIR ADVISE !

LOVE THIS PULLING BOARD !

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy