Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Pulling Discussion Forum

Sunday in Sandusky MI

Welcome Guest, Log in or Register
Author 
BCG

10-28-2005 11:19:56




Report to Moderator

I was wondering if you are running 16.9/34 for div2 on Sat. will you be able to pull on sunday?

Ben




[Log in to Reply]   [No Email]
A.P.

10-28-2005 11:53:22




Report to Moderator
 Re: Sunday in Sandusky MI in reply to BCG, 10-28-2005 11:19:56  
Yes, from 5500# up in div. 2 you can run a 16.9 x 34 or even a 16.9 x 38". You can find the rules by following the link at www.emtpa.org. Do be aware the EMTPA div.#2 (NOT NATPA) rules allow top bar cut tires.



[Log in to Reply]  [No Email]
Charles Poosch

10-31-2005 04:55:21




Report to Moderator
 Re: Sunday in Sandusky MI in reply to A.P., 10-28-2005 11:53:22  
also be aware that emtpa drawbar is 18" high, 24" back. If you cannot meet this, no big deal we will let you pull, but it will be exhibition only.

CP



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy