Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

R model jd pony moter

Welcome Guest, Log in or Register
Author 
steve hacker

12-23-2002 18:26:47




Report to Moderator

ok guys, i have always gotten alot of good help on, thx in advance, tore into my 1949 model R jd pony moter and found a little suprise, govenor assm had came apart and took out the oil pump gear, due to lack of oil press the eng siezed up, i need alot of parts and gaskets, pistons, rings, sleeves, oil pump gear, gov assm, anu bunch of stuff, can u guys give me some clues where to get these items or a whole nother two cylinder pony moter, this is sad as mine was a handcrank also,,,thx steve

[Log in to Reply]   [No Email]
Tugboat

12-24-2002 09:29:40




Report to Moderator
 Re: R model jd pony moter in reply to steve hacker, 12-23-2002 18:26:47  
Greg Stevens has always been able to supply me with parts for my "R" pony. I'll find his number if you need this. I completely rebuilt my motor using parts that he supplied.
Tugboat



[Log in to Reply]  [No Email]
Tugboat

12-24-2002 09:12:35




Report to Moderator
 Re: R model jd pony moter in reply to steve hacker, 12-23-2002 18:26:47  
Greg Stevens has always been able to supply me with parts for my "R" pony. I'll find his number if you need this. I completely rebuilt my motor using parts that he supplied.
Tugboat



[Log in to Reply]  [No Email]
steve hacker

12-23-2002 18:46:27




Report to Moderator
 Re: R model jd pony moter in reply to steve hacker, 12-23-2002 18:26:47  
mr.woodward, i have tried to pull up the johnnypopper site and cant, is there anyway u could copy and paste me his adress, if so i will e-mail him about the pony moter he has,,,thank you so much,,,steve hacker



[Log in to Reply]  [No Email]
C Woodward

12-23-2002 19:01:56




Report to Moderator
 Re: Re: R model jd pony moter in reply to steve hacker, 12-23-2002 18:46:27  
Steve
Thanks for the Mr. Try this hope it all comes through.. CjW

Posted by Todd on December 23, 2002 at 20:21:39:

620 John Deere
Has Very Good Sheetmetal, Gasoline Engine, New Seat And Backrest, New Grills, Power Steering, Live PTO And Hydraulics. Good Clean Tractor. $3750 Or Make Offer, I Can Email Pictures soon.

John Deere 70 Diesel
70 Diesel Runs Excellent, Starts Great, 16.9x38 Rear Tires, Live PTO, Excellent Power Steering, Hydraulics, New Seat And Backrest, New Grills, Very Nice Sheetmetal, Nice Running Original Tractor. $3500 or make offer, Can Email Pictures.

730 Diesel John Deere
Excellent Running Original Tractor, Original Paint, Electric Start, Three Point Hitch, Excellent Sheetmetal, Excellent Batteries, Matched Rubber, Power Steering, Live PTO And Live Hydraulics. Very Good Untouched Tractor, Ready To Farm. Can Email Pictures... Asking $5500 Or Make Offer.

70 Gas John Deere
Good Running Tractor, Starts Great, Good Gears, Original Lights, Live PTO, Live Hydraulics, New Grills, Good Tin, Rollomatic Frontend, Good Working Tractor, $3500 or make offer. Can Email Pictures.

720 Diesel John Deere
Good Running Tractor, Has Power Steering, Live PTO, And Hydraulics. Good Sheetmetal With New Grills, Needs Attention, Can Email Picture. $2950.

1941 B John Deere
Very Good Condition, Starts And Runs Nicely, Good Sheetmetal, Original Handstart, Pressed Steel Wheels, Pan Seat, Good Sound Tractor, Ready To Get On And Go. $1950 or make offer. Can Email Pictures.

3020 DIESEL John Deere
Has Side Console Levers, Very Nice Original Tractor, Has Not Been Repainted. Starts Excellent, Runs Excellent, Very Quiet Transmission, Excellent Brakes And Power Steering, Perfect Sheetmetal And Fenders, $1000 Worth Of New Matching Tires 18.4x34 Rear And 11Lx15 Fronts, Front Weights, Original Three Point Hitch With Original Toplink, Three Factory Hydraulic Remotes (6 couplings), 540 and 1000rpm PTO, Pre-Cleaner, Block Heater. Can't Say Enough About This Tractor. A Tight Original 3020 Ready To Work. $10,900 or make offer. Can Email Pictures.

John Deere Model 45 Loader
This Loader Is In Super Nice Original Condition, Has Dirt Bucket And Manure Forks. It Also Has The Lines, Hookups, And Original Mounting Hardware. Ready To Mount And Use, Has No Rust Pitting. These Were Made For Models A, B, G, 50,60,70,520,620,720,530,630,730. Asking $475 or best offer. Can Email Pictures.

John Deere Pony Engines
Have Two Pony (Starting) Engines. One Fits Model R Tractors And The Other Is For The Later Tractors, 70,720,730,etc. Haven't Had Them On a Tractor But They Are Free And Pretty Well Complete. $375 Each.

John Deere 70 Parts
I Have A Lot Of Good Parts For Model 70 Tractors, Some Diesel Parts.

John Deere Wide Frontends
Original John Deere Wide Frontends, Have Round Casting And Square Casting, Complete With Pivot Plates, Fit Models A, B, G, 50,60,70,520,620,720,530,630,730. $900 to $1100. Can Email Pictures.

Todd A. Brakebill
Location: Franklin/Nasville TN
Phone: 615-351-1022
Phone: 615-790-3742
Email: Tbrake12@aol.com

[Log in to Reply]  [No Email]
C Woodward

12-23-2002 18:35:15




Report to Moderator
 Re: R model jd pony moter in reply to steve hacker, 12-23-2002 18:26:47  
Steve
Sorry to hear about your pony motor.
If you are looking for a motor get with
Todd in Tenn he just posted on jonnypopper.com
That he had a pony for a "R" and that most of it was there.. Good luck and have a Merry Christmas..
CjW



[Log in to Reply]  [No Email]
C Woodward

12-23-2002 18:34:35




Report to Moderator
 Re: R model jd pony moter in reply to steve hacker, 12-23-2002 18:26:47  
Steve
Sorry to hear about your pony motor.
If you are looking for a motor get with
Todd in Tenn he just posted on jonnypopper.com
That he had a pony for a "R" and that most of it was there.. Goog luck and have a Merry Christmas..
CjW



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy