TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Clinton engine parts

Welcome Guest, Log in or Register

Author

rick

04-15-2001 18:27:33

Report to Moderator

I have lots of antique clinton engine parts including carbeurators and gas tanks and other parts in original packages. Rick

[Log in to Reply] [No Email]

Abstract

05-30-2006 19:45:45

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

I JUST GOT A 7.5 SEA KING/CLINTON OUTBOARD AND HAVE NO SPARK. IS IT POSSIBLE TO GET THE IGNITION PARTS? I THINK IT IS PART # 268-0036-50 OR IS THERE SOME OTHER PART THAT CAN BE CROSSED OVER.
MDL# K7515106B SER# 1380108 TYPE#XTV50575B.
THANK YOU.

[Log in to Reply] [No Email]

99dave

01-24-2006 08:39:10

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

need 2horse piston and rings thanks

[Log in to Reply] [No Email]

Scott King

05-01-2006 16:35:05

Report to Moderator

Re: clinton engine parts in reply to 99dave, 01-24-2006 08:39:10

I have a 1968 4 horse water cooled Clinton that I need a Carberator for do you have one and if so how much...

[Log in to Reply] [No Email]

David Powell

10-10-2005 11:20:56

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

Hi, I need an impeller assembly/a roll pin for the k-300. Is this a miracle? Dave

[Log in to Reply] [No Email]

Tim L

07-23-2005 15:34:04

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

I need a recoil flat spring for my 5hp cheif model number J9 1101 B. any help would be great

[Log in to Reply] [No Email]

R , SCHEMMEL

06-03-2005 08:35:14

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

I have a J-8 outboard motor -serial 50727 Type 10-13-8-0-5-6 I am looking for a Diaphragm-Fuel pump PART No 700885

[Log in to Reply] [No Email]

Mac

09-29-2003 14:05:25

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

I have a Clinton Model #A4001101D and need a carb. Is this something you might have? Engine will run if gas is poured in but it will not pickup fuel from float bowl. Last owner left it in storage without draining engine.

Thanks in advance for your reply

[Log in to Reply] [No Email]

George Harris

09-25-2003 15:27:00

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

Rick: I have a Clinton J-8 (Apache) 5hp outboard motor. Serial #77666. Model J8 1106. I need a flywheel for this motor. Please contact me if you can supply one.

[Log in to Reply] [No Email]

George Harris

09-25-2003 15:13:02

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

Rick: I have a Clinton J-8 5hp outboard (Apache) motor. Serial # 77666. Model J8-1106. I need a flywheel. Please let me know if you can help me.

[Log in to Reply] [No Email]

TOM ARMSTRONG

08-22-2003 19:06:50

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

RICK-I HAVE A CLINTON 4.5 HP MOTOR THAT CAME OFF OF AN OLD TILLER. IT NEEDS A NEW CAM SHAFT. DO YOU HAVE ANY AND IF SO WHAT PRICE? LET ME KNOW ALSO WHERE I CAN FILE ANY MODEL OR ENGINE NUMBERS ON THIS MOTOR-SO FAR I'VE NOT FOUND ANY.

[Log in to Reply] [No Email]

Andrew Farr

11-03-2001 16:53:33

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

i have a small clinton engine need piston rings.serial # is X148601 model # is A490 1112. i would thank you a lot for any info on were to get them.

Thanks

Andrew

[Log in to Reply] [No Email]

Leo

04-22-2001 09:38:54

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

I am restoring a Clinton series 500 that rusted away on a Sears or Wards two-wheel garden tractor. I know I need a round gas tank and lot of other stuff. Would like your address for future parts ordering. I have a dirty but complete operating and repair manual that also covers a 700 series. Leo

[Log in to Reply] [No Email]

bob young

04-27-2001 19:01:13

Report to Moderator

Re: Re: clinton engine parts in reply to Leo, 04-22-2001 09:38:54

leo,
looking for manual on 3.5hp clinton which i
acquired in Deming,nm.

peter

[Log in to Reply] [No Email]

Leo

04-28-2001 18:23:30

Report to Moderator

Re: Re: Re: clinton engine parts in reply to bob young, 04-27-2001 19:01:13

Peter, better see Rick. Leo

[Log in to Reply] [No Email]

04-19-2001 12:50:24

Report to Moderator

Re: clinton engine parts in reply to rick, 04-15-2001 18:27:33

i need elec. parts for a model xtv 50507 type k75161c7a
I would be thankfull for any help.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy