Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Stationary Engines Discussion Forum

Hey Doog Doog

Welcome Guest, Log in or Register
Author 
Question For Yo

06-12-2005 19:37:20




Report to Moderator

Played with my Briggs carb a little while over the weekend. Didn't have a lot of time. I tried blowing through a piece of fuel line, to see if I could blow past the needle, with the carb upside down. I can't. The needle seems to be seating okay. Didn't have time to fool with it past that.

I live in Tennessee.




[Log in to Reply]   [No Email]
doogdoog

06-13-2005 21:12:09




Report to Moderator
 Re: Hey Doog Doog in reply to Question For You, 06-12-2005 19:37:20  
Aloha , Well, at least it's it shows that that needle valve is doing it's job, and hope that it is not an intermittent problem. Maybe the gasket is not fitted correctly or something of that nature because if the fuel is overflowing and assuming the float and needle is doing it's job, gas has to enter from someplace. Keep me posted.

Mahalo,
doogdoog



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy