TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

Everybody wants a UDLX

Welcome Guest, Log in or Register

Author

Les...fortunate

01-15-2005 18:51:04

Report to Moderator

Or an ETD. But since you're not likely to ever get one, what would you like to have instead? Think big. Think small. Hey, dreaming is free.
I'd like an F20 and an E3.

[Log in to Reply] [No Email]

JWhite

01-16-2005 18:57:18

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

I would rather find a set of plans to bild my own 1892 Froelich. I wouldn't mind a Daine, any brand of the autoplow tractors (Indiana, Moline, ect), or a Deere GP Standard. But for reality, I would like a lug for my skeleton wheeled John Deere B.

[Log in to Reply] [No Email]

JDknut

01-16-2005 16:46:56

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

My dream tractor is a Deere 4230 gas. With 4-post Roll Gard but I'm not picky would take one with SOund Gard body. Only 33 4230 gasses were made. Might settle for a 4030 gas, only about 200 of those.

[Log in to Reply] [No Email]

01-16-2005 13:34:57

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

I'm thinking either a 1939 A, or a 730, which ever turns up first for the right price! Don

[Log in to Reply] [No Email]

nebraska kirk

01-16-2005 13:16:25

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

My dream is a SMDTA.

[Log in to Reply] [No Email]

panzerfaust

01-16-2005 08:15:59

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

My Neighbor has a 1976 JD 6030 with only, get this, 500 hours on it. everything works great and it is Garage kept he used it for a few years to pull his plow. Now he gets it out a few times a year for parades and such the Ac in that thing will freeze you out on a 90 deg. day LOL He upgraded the sound system and it has new Insulation. the tractor is better than new. He said i could buy it for 20,000

[Log in to Reply] [No Email]

01-16-2005 07:58:58

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

110 Case.

[Log in to Reply] [No Email]

snitkawl

01-16-2005 07:30:49

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

All I have are Ford hundred series and in general have no love for JD, but would like to have a JD LA.

[Log in to Reply] [No Email]

01-16-2005 07:04:58

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

I would like to have a small crawler someday. Dad used to have a couple of them when I was a kid always thought they were cool. The only draw back I can remember is that everything was big and heavy when it needed repaired.

[Log in to Reply] [No Email]

Jason(ma)

01-16-2005 05:55:33

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

Pre 37 Farmall f-30 wide front, or maybe a high speed rice f-30 if I could ever find one that I could afford.

[Log in to Reply] [No Email]

Nebraska Cowman

01-16-2005 04:28:45

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

I'm still dreaming about that W4 that I'm getting from Sloroll. It will be a nice addition to my H and M collection. Lets see.... has anyone seen a W4 or W6 on propane? Another dream tractor for me is a 1206 Farmall.

[Log in to Reply] [No Email]

billyiron

01-16-2005 01:47:42

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

Id just like to have every thing I got paid for,,the banker says I have iron poor blood,,I always think I need more iron,,,billy

[Log in to Reply] [No Email]

Dean Barker

01-15-2005 21:31:04

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

I would like another John Deere 4320, one without a cab. Or how about a White 185 or 195. Maybe even a CaseIH 9330 for the heavier stuff.

[Log in to Reply] [No Email]

Davis In SC

01-15-2005 21:24:28

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

Is the buyer of the UDLX that sold on Ebay recently a participant here ??? It was fun watching that auction...

[Log in to Reply] [No Email]

TomR Ont.

01-15-2005 19:48:06

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

Like the Lottery:
The dream dosen't die,
Just the dreamer.
Mine would be a small and a large John Deere.
(before the 90's) with all the toys for them.
darn! the wife just woke me up.

[Log in to Reply] [No Email]

dennis in nc

01-15-2005 19:26:44

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

SAW F-20 4- sale today s/n 143887 i think. I LEFT A NOTE IN THE GUYS MAIL BOX TO CALL ME

[Log in to Reply] [No Email]

Sloroll

01-15-2005 19:09:11

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

Good to see yuh Les! Yup EDT has it hands down but I've got a duckbilled F-20 on the way that I'm pretty excited about and a maching ducky F-30. gona make a pair Just like Nebraska Cowman's!

[Log in to Reply] [No Email]

rgriff

01-18-2005 03:42:40

Report to Moderator

Re: Everybody wants a UDLX in reply to Sloroll, 01-15-2005 19:09:11

I also have a duckbilled F-30. 1937. I have been trying to fined out info on the duckbill. I didn't even know what I had till someone at our show told me what it was. I can't find any books or magazines about them. Any info would be nice....

Thanks

[Log in to Reply] [No Email]

earlschieb

01-15-2005 19:22:15

Report to Moderator

Re: Everybody wants a UDLX in reply to Sloroll, 01-15-2005 19:09:11

So you got that NICE W 4 traded off afterall Bill?

[Log in to Reply] [No Email]

Sloroll

01-15-2005 19:27:44

Report to Moderator

Re: Everybody wants a UDLX in reply to earlschieb, 01-15-2005 19:22:15

It is a handshake deal. I have always had more faith in a handshake than any slip of paper. Gramps had a VAC With a powertake off chainsaw. Took two men and a Chimp to run it but it would slice up a tree! Every once in a while I'd like a VAC too. I was to young to run his. Always thought the foot accelerator was pretty Keen!

[Log in to Reply] [No Email]

Roy in UK

01-15-2005 23:29:13

Report to Moderator

Re: Everybody wants a UDLX in reply to Sloroll, 01-15-2005 19:27:44

Sloroll,
"It is a handshake deal. I have always had more faith in a handshake than any slip of paper"
So did Harry Ferguson, uh oh!

[Log in to Reply] [No Email]

Sloroll

01-16-2005 11:49:29

Report to Moderator

Re: Everybody wants a UDLX in reply to Roy in UK, 01-15-2005 23:29:13

Mr. Ford wasn't a farmer. Trust is a two way street Trust trusting people and you seldom go wrong.

[Log in to Reply] [No Email]

Jon H

01-15-2005 20:27:27

Report to Moderator

Re: Everybody wants a UDLX in reply to Sloroll, 01-15-2005 19:27:44

I have a new 2 man pto powered chainsaw in the rafters of my shed. Did some repair work for a guy who used to sell them new,and took the saw as payment. It has a pto pump with oil tank that goes on the tractor,and The saw is Green(Dont remember the brand name). Has a handle on each end of the 4-6 ft bar. Has a hyd motor at one end with a little valve to bleed hyd oil on the chain for lube. Been up in the rafters for 20-30 years. Is that like what you had.

[Log in to Reply] [No Email]

big jt

01-15-2005 22:08:32

Report to Moderator

Re: Everybody wants a UDLX in reply to Jon H, 01-15-2005 20:27:27

Von Ruden is the brand. I think they are still in business at least I have seen much newer gear boxes with the same name on them.

Before the Hydraulic saw they made a mechnical drive one. Gear box on a pivot on the drawbar sort of spring loaded arrangement. Also had a 4 handle (2 man?) hydraulic post hole digger.

Sure would like to see your new never used saw. Jewels like that are hard to come by. I was never able to make either saw work right. Hydraulic had no resevoir and the mechnical is a mankiller. The only time I had it set up I was alone. Seemed like you needed someone to engage the PTO and another person to run the out handle.

Back to the original topic a ETD would always be nice. Know a guy who owned the high selling UDLX from last spring in Iowa. He was the owner previous and I think he restored it. He said he never realy liked it, to rough riding. The long time tractor that I always wanted was a late Hart Parr 18-36 like my Grandpa had. Finally made that happen a little over a year ago after 20 plus years.

Guess bachelorhood has its priveliges!!

JM2CW

[Log in to Reply] [No Email]

earlschieb

01-15-2005 19:33:30

Report to Moderator

Re: Everybody wants a UDLX in reply to Sloroll, 01-15-2005 19:27:44

I have never seen a Chainsaw mounted on a tractor, I`ll bet that is an interesting piece of equipment. I have been wanting a Vac with an Eagle hitch for a while, just never seem to find one. But of course, I have also been wanting a W4, or SW 4, but I doubt if that will happen either.

[Log in to Reply] [No Email]

Les...fortunate

01-16-2005 10:52:44

Report to Moderator

Re: Everybody wants a UDLX in reply to earlschieb, 01-15-2005 19:33:30

I have a VACuum with an Eagle hitch that I would be willing to trade for a W4. You transport?

[Log in to Reply] [No Email]

Dream Grantor

01-15-2005 21:29:11

Report to Moderator

Re: Everybody wants a UDLX in reply to earlschieb, 01-15-2005 19:33:30

earlschieb ..... i'm the fella that "makes dreams come true" - i have a very "minty" 1952 W4....AND A Restored SW4 (cheap !)

[Log in to Reply] [No Email]

earlschieb

01-16-2005 06:09:17

Report to Moderator

Re: Everybody wants a UDLX in reply to Dream Grantor, 01-15-2005 21:29:11

You do, how far away, Wisconsin? Shipping is what the killer is on most W 4 tractors that I have found. Found a nice one in the UP of Michigan for a very nice price, but it was gonna cost me a grand to get it here.

[Log in to Reply] [No Email]

Sloroll

01-15-2005 19:41:30

Report to Moderator

Re: Everybody wants a UDLX in reply to earlschieb, 01-15-2005 19:33:30

At the possibility of bringing upon myself the wrath of some... My true dream is a steamer. That'll probably never happen. There are W4s about and not all that pricey if you keep your ear to the ground. Trucking is the big expense for those of us in rowcrop country. I can understand it, gas and insurance is expensive for those guys. Every once in awhile though, if they happen to be going by with a little extra room you can get a deal. I told gramps I wanted that saw but when I wasn't looking he sold it. I know now he didn't want me hurt but at the time I was pretty upset. I was to young to have it for sure.

[Log in to Reply] [No Email]

earlschieb

01-15-2005 19:08:16

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

I`d like to have a Case VACuum, with an Eagle Hitch, ya know anybody out East that would like to GIVE me one?

[Log in to Reply] [No Email]

Coloken

01-15-2005 19:04:31

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

I'd just like to find a utility tractor with live power and PS for less that the 6000 dollars that dealers want. Have you doticed that 40 year old tractors sell for more that they did new?

[Log in to Reply] [No Email]

Dream Grantor

01-15-2005 21:35:39

Report to Moderator

Re: Everybody wants a UDLX in reply to Coloken, 01-15-2005 19:04:31

Coloken ..... as long as it's red & says IH - i can make it happen .....how about a (EXC.Original)350 utility with power stearing ?????

[Log in to Reply] [No Email]

big fred

01-15-2005 19:04:03

Report to Moderator

Re: Everybody wants a UDLX in reply to Les...fortunate, 01-15-2005 18:51:04

Well, I'm a Farmall man, but I useta have this neighbor who was retired. He had a JD B. I'd like to be retired, too.

[Log in to Reply] [No Email]

Vern

01-15-2005 21:10:22

Report to Moderator

Re: Everybody wants a UDLX in reply to big fred, 01-15-2005 19:04:03

Careful Fred. Once you're retired you never get a day off.

[Log in to Reply] [No Email]

edchainsaw

01-15-2005 19:16:36

Report to Moderator

Re: Everybody wants a UDLX in reply to big fred, 01-15-2005 19:04:03

well humm... think I would like (antique) maybe a Cockshutt 40-D4 Golden Eagle (think thats how you say it) or maybe a low radiator G (or the original parts for the one we have)

but for real I would like for dad to be able to plant with an 8100-8110-8120 intead of grampa's 4430

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy