Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Hey NE Cowman or anyone near Colorado

Welcome Guest, Log in or Register
Author 
PatMx

04-13-2005 06:46:52




Report to Moderator

I busted the lift arm on my Farmhand F11-B a week and a half ago. I was pushing heavy wet snow and the arm pulled apart around the hinge pin at the top of the arm. It doesn't look like there's enough room to rebuild/weld it and still fit inside the upright and make it safe. Plus, ALL the hinges are wallowed out bad on mine, and there'e enough plate welded to the frame to sink a small battleship. In short, not enough there to make a rebuild reasonable.

Has anyone got a line on another F11-B, or where to look?. I'm about 50 miles SE of Denver, 50 miles west of Limon, CO. What I need is a good lift arm assembley, don't need cylinders (mine are good), or PTO pump, bucket or controls. The loader was mounted on a Farmall M.

[Log in to Reply]   [No Email]
Nebraska Cowman

04-13-2005 10:49:53




Report to Moderator
 Re: Hey NE Cowman or anyone near Colorado in reply to PatMx, 04-13-2005 06:46:52  
I see F11s sell fairly often. can't think of one right now though.



[Log in to Reply]  [No Email]
PatMx

04-13-2005 16:41:29




Report to Moderator
 Re: Hey NE Cowman or anyone near Colorado in reply to Nebraska Cowman, 04-13-2005 10:49:53  
Talked to Pete's Repair in Bridgeport. He's got a F11-C frame that's in decent shape. Round holes for the pins, not a lot of welding. I think I'm gonna go see it Sunday. It's only 4 hours away. I'll honk when I leave Cabella's!



[Log in to Reply]  [No Email]
Allan in NE

04-13-2005 17:23:13




Report to Moderator
 Re: Hey NE Cowman or anyone near Colorado in reply to PatMx, 04-13-2005 16:41:29  
Pat,

If he doesn't have what you need, cross the river at the north end of town and stop at Gary's.

He's probably got a 100 of 'em setting out there.

Allan



[Log in to Reply]  [No Email]
PatMx

04-13-2005 20:40:54




Report to Moderator
 Is there a good cafe in reply to Allan in NE, 04-13-2005 17:23:13  
or restaraunt in or near Bridgeport that's open on Sunday?

We're gonna make it a family outing. See what's left of the wild wild west along the North Platte.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy