TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

NH 461 help again

Welcome Guest, Log in or Register

Author

Tim Shultz

07-06-2006 09:28:56

Report to Moderator

got most of the hay cut, have about 6 mocos wide left, then it will be done.. but I blew out a U-joint.. right back of the shear bolt. whats the best way to go about replacing this? can I get the u-joint from TSC or am I going to have to drive the half hour to the NH dealer? THANKS FOR THE HELP!
Tim Shultz

[Log in to Reply] [No Email]

Blue Buddy

07-06-2006 15:23:33

Report to Moderator

Re: NH 461 help again in reply to Tim Shultz, 07-06-2006 09:28:56

I hear it all guys, and both sides have good points, but when yu want to come knocking at the end of my 50 hours of work week, not to mention work at home, I am done, and get a little crabby, so if ya find a guy to help, just be polite and say Thanks, it really does make a difference if the help has been appreciated.

Now, about that Mo-Co, I have seen some fail, not just burn out the cross but break the yoke, and it seems to be cause the slip clutch is rusted up and not giving a little to keep the chuck out of the power shaft, when yer using it normal and ya stop, shut it off and put yer hand on the slip clutch, should just be a little warm, hot means too much slip, cold means too tight and no give, not scientific, but it works, works on balers too just to check and make sure they do the job

[Log in to Reply] [No Email]

RandyWi

07-06-2006 09:34:13

Report to Moderator

Re: NH 461 help again in reply to Tim Shultz, 07-06-2006 09:28:56

Wow Tim,,
if i didnt know better i would say you were me with that kind of luck!!
Actually,,, i blew the u-joint at the pto coupler.
went to TSC,, couldnt match one up. ended up building a whole new shaft. Same thing,,, didnt want to have to deal with the NH dealers schedule.
Aint it fun!!
Randy

[Log in to Reply] [No Email]

24/7?

07-06-2006 11:42:30

Report to Moderator

Re: NH 461 help again in reply to RandyWi, 07-06-2006 09:34:13

I work at a JD dealership I get so fed up with you guys that want us to be open all the time. I have a family too. I farm also I need time off in the evening to spend time with the family and work in the fields. I guess if we stay open in the evening you guys at the bank will stay open in the evening also. Get real guys!!!!! !!

[Log in to Reply] [No Email]

IaGary

07-06-2006 14:43:36

Report to Moderator

Re: NH 461 help again in reply to 24/7?, 07-06-2006 11:42:30

Don't know who you are but I farm for a living and I agree with you 1000%.

You have to have a life also.

Guys you need to put your self in there shoes.

If a call during business hours doesn't get your parts find another dealer.

Been on both sides of the counter by working at a farmer welding service for 14 years.

And when 5 or 6 came I was ready to go home and farm.But while at work I worked my but off to get the farmer going again.

He's right someday there will be no dealers in the area if we don't support them.

Just my thoughts.

Gary

[Log in to Reply] [No Email]

massey333

07-06-2006 15:29:49

Report to Moderator

Re: NH 461 help again in reply to IaGary, 07-06-2006 14:43:36

GOOD for you Gary,These people(WALMART-EBAY) buy these old wornout pieces of equipment,don't know the first thing about it and expect the POOR PARTS MAN to know THEIR SERIAL number and all.AS far as the dealer saying to call back later,It hurts and makes you mad,but when the MFG. TELLS THE DEALER HE HAS TO PUT UP A MILLON$$$BUILDING most are telling the MFG. to go to----- and go out of busness,then we are left with MEGA dealers who can't afford to keep a bunch of good parts people on the payroll yearround so we have to wait sometimes.As far as the person getting on here and asking where to buy parts because he would have to drive aHalf Hour to NH,well unless he can type faster than I do than he could have been there and back.When the dealers are gone then what are you going to cry about??Let the bashing begin.

[Log in to Reply] [No Email]

Tim Shultz

07-06-2006 15:36:41

Report to Moderator

Re: NH 461 help again in reply to massey333, 07-06-2006 15:29:49

you got me wrong, I suport the dealers all the time.. the case and JD dealers are lots of help.. the NH dealer on the other hand don't even try to go the extra mile.. all I needed was a part for my PTO shaft.. went to both the case and JD dealer.. tryed to help me.. but I have to go to the NH dealer now.. don't know, I might be wrong, but I think you should try a little harder to help the people that keep you going.. without guys like me, they would not even be selling parts.. heck I have droped around 1,500 at all three dealers in the last five years.. and I only have 8 acres of hay.. Tim Shultz

[Log in to Reply] [No Email]

RandyWi

07-06-2006 15:47:18

Report to Moderator

Re: NH 461 help again in reply to Tim Shultz, 07-06-2006 15:36:41

Guys!! Dont get me wrong either. I spend plenty of money at the dealer also! Have also gotton ALOT of help from them. My point was ( and i am sorry if i worded it wrong) was i was trying to finish up my haying... blew a ujoint,,, and TSC was open on the 4th! but why is the u-joint have to be so special? I have nothing against the dealer also!! God bless them! I was just upset about the "special" ujoint!
Randy

[Log in to Reply] [No Email]

massey333

07-06-2006 16:41:51

Report to Moderator

Re: NH 461 help again in reply to RandyWi, 07-06-2006 15:47:18

Sorry for maybe a Personal attack,but it used tobe the lawnmower people and now it is them plus the 10-50Acre people WHO HAVE NO PATIENCE at the parts counter.I know EVERYONE should or needs to be treated Fairly,but it gets hard on everyone when you have aFARMER who maybe buys 1-2THOUSAND a MONTH and has a crop to put in or harvest STANDING there for a HOUR or TWO while the POOR Parts person trys to find a Part for someone who doesn't know what he needs and then DOESN'T buy the part when he thinks the price is too high and can get it CHEAPER elsewhere.My personal findings have been Other than DEERE,Former IH dealers don't really support Case,FORD that weren't NH don'tsupport NH andETC.It is a sad state but we are going to have live with it somehow

[Log in to Reply] [No Email]

RandyWi

07-06-2006 20:34:37

Report to Moderator

Re: NH 461 help again in reply to massey333, 07-06-2006 16:41:51

massey333,
I really do understand where you are coming from. Besides trying to get a farm going again that has been idle a LONG time. I also co-own a auto repair business. And yes it is a pain in rear with people who seem to just want to waste time. and then try and be polite to the next person in line. There are some great parts people out there,, there are also some not so great ones. But i do know that being in the people biz... you just end up grinning and bearing it. I really did not mean that every dealer ship should revolve around my schedule. that was not my point! It was really frustrating about that dang u-joint!
Again,,,, sorry to all!
Randy

[Log in to Reply] [No Email]

Tim shultz

07-06-2006 09:38:07

Report to Moderator

Re: NH 461 help again in reply to RandyWi, 07-06-2006 09:34:13

yeah, lots of fun.. called the NH dealer three times now in the last hour, said where busy and can't help you right now.. call back later.. so I guess it's to TSC I go.. :(
Tim Shultz

[Log in to Reply] [No Email]

Rob NC

07-06-2006 10:13:42

Report to Moderator

Re: NH 461 help again in reply to Tim shultz, 07-06-2006 09:38:07

tim if the nh dealer told you that you need to get in touch with the nh district rep., he will straighten their butt out.

[Log in to Reply] [No Email]

LOL your funny

07-06-2006 11:45:40

Report to Moderator

Re: NH 461 help again in reply to Rob NC, 07-06-2006 10:13:42

So a phone call is more important then the guy who drives to the dealership to buy parts. You guys keep busting on the dealers just wait till they go out of bussiness and you have to go to TSC and try to get parts from the pimple faced teenager who does not know what a haybine is. Your funny LOL LOL

[Log in to Reply] [No Email]

Tim Shultz

07-06-2006 14:33:21

Report to Moderator

Re: NH 461 help again in reply to LOL your funny, 07-06-2006 11:45:40

it's not that they where busy, but the way they said it.. didn't say sorry please call back later.. TSC is nicer than that.. though they didn't have the part, so I guess I HAVE to go to the NH dealer.. went to the case dealer, they tryed to help, but didn't have the part I needed.
Tim Shultz

[Log in to Reply] [No Email]

evilboweviel

07-06-2006 12:35:01

Report to Moderator

Re: NH 461 help again in reply to LOL your funny, 07-06-2006 11:45:40

at least they are willing to use their handle and not make up a name each time!
use your handle when making comments or forget about posting Dosn't matter if you have a good point and we agree if you won't stand up and use your own handle
Ron

[Log in to Reply] [No Email]

LOL your funny

07-06-2006 16:04:39

Report to Moderator

Re: NH 461 help again in reply to evilboweviel, 07-06-2006 12:35:01

thats right your funny HEHE

[Log in to Reply] [No Email]

RandyWi

07-06-2006 09:41:09

Report to Moderator

Re: NH 461 help again in reply to Tim shultz, 07-06-2006 09:38:07

Look at it this way Tim,
next time,, not a problem finding a joint.
least thats what i kept telling myself when i shelled out the $$ for a whole new shaft.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy