TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Rototiller

Welcome Guest, Log in or Register

Author

Dave

11-06-1999 13:15:35

Report to Moderator

I have a Gilson Rototiller 5 hp
Model 5100442858 made by Gilson Brothers Company in Plymouth WI - USA
I need a the belt that goes from the motor to the front tines. Can someone tell me what size belt I need?
Thanks

[Log in to Reply] [No Email]

w.v. colicchio

07-13-2002 16:21:18

Report to Moderator

Re: rototiller in reply to Dave, 11-06-1999 13:15:35

Hello I found a roto tiller in the trash. so,i took it home and cleaned it up. on the name plate is all of the following; GILSON BROTHERS serial # 019678; Plymouth, Wisconsin. it leaks oil out of the spark plug hole, badly, too. On the motor cover is a group of numbers, they are: 82302-01773-01-6808186.Please contac me at: luckycat453@aol.com Thank you.

[Log in to Reply] [No Email]

Nick Gouliaras

05-08-2001 08:51:07

Report to Moderator

Re: rototiller in reply to Dave, 11-06-1999 13:15:35

I have a garden tiller with the following specification and I need either a user's manual or information on size of belts and how to put them on the pulleys(orientation)
Manufacturer: Gilson Brothers comp.
Model 70-222-05 or 10-222-05
HP 4, motor Briggs & Statton (Milwaukee}

[Log in to Reply] [No Email]

Stan Brown

02-15-2003 19:43:11

Report to Moderator

Re: Re: rototiller in reply to Nick Gouliaras, 05-08-2001 08:51:07

Hello, I am looking for the same information that you are. I have a Gilson Rototiller also and need to know how to set up the belts on the pullys. If you received any help on your question, will you please email me and help me out? It would really be appreciated. Thanks, Stan Model # 51134 45917 Serial # 249

[Log in to Reply] [No Email]

Buck Gregory

03-28-2004 04:47:02

Report to Moderator

Re: Re: Re: rototiller in reply to Stan Brown, 02-15-2003 19:43:11

Hello Nick & Stan

It seems we may all be part of a growing club. I too have a Gilson Rototiller that I need help in installing the belts. Did you have any luck?

[Log in to Reply] [No Email]

michelle

06-30-2004 18:54:19

Report to Moderator

Re: Re: Re: Re: rototiller in reply to Buck Gregory, 03-28-2004 04:47:02

Hi.. I had to respond cause I am trying to help out my brother in law.... He is in need of a diagram on how to install the belts on the Gilson that he has,,, it is model # 39012b, serial # 0074L1-772.... Does anyone know where to start or can anyone help? A manual would be of great assiatance. Does anyone know where to find such a thing? Thanks!

[Log in to Reply] [No Email]

jed1950

11-23-2004 17:32:26

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to michelle, 06-30-2004 18:54:19

do you still need info on your tiller,I have info and I am parting out 2 complete tillers of this same model GIL 39012B

[Log in to Reply] [No Email]

dr-chuck

06-08-2005 06:03:29

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to jed1950, 11-23-2004 17:32:26

I need to know how the belts go on if you have this info. Thanks..Charlie

[Log in to Reply] [No Email]

Mack villalpando

04-07-2005 18:54:00

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to jed1950, 11-23-2004 17:32:26

Yes iam in need of information of how to put the belt on properly and what size it should be thanks in advance. mine is a model Gil 39032B

[Log in to Reply] [No Email]

Bonnie

07-29-2005 23:11:06

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to Mack villalpando, 04-07-2005 18:54:00

I need a gear box for a Gibson ..... .....anyone?

[Log in to Reply] [No Email]

John Pucher

05-07-2004 13:13:07

Report to Moderator

Re: Re: Re: Re: rototiller in reply to Buck Gregory, 03-28-2004 04:47:02

I have a manual for a Gilson Rototiller model 51134 45917.

[Log in to Reply] [No Email]

Tom Wolff

06-26-2006 18:51:11

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to John Pucher, 05-07-2004 13:13:07

I know this is a very old thread but I am in need of the Gilson Brothers manual (51134 45917) as well. If anyone has a copy available in hard or soft copy I would appreciate it.

Thanks,

Tom

[Log in to Reply] [No Email]

Gregoryscott

05-20-2007 15:28:22

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to Tom Wolff, 06-26-2006 18:51:11

I know this is a very old thread but I am in need of the Gilson Brothers manual (51134 45917) as well. If anyone has a copy available in hard or soft copy I would appreciate it.

Thanks,

Scott

[Log in to Reply] [No Email]

JVG

07-01-2006 12:08:01

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to Tom Wolff, 06-26-2006 18:51:11

Happened to find your request when I was looking for some spare parts. I have a Gilson 51134 and it still runs great. I also have the owner's manual/parts list that came with it. I can scan the manual into a pdf file and send that to you if you still need it.

[Log in to Reply] [No Email]

Ed Stephens

06-11-2007 08:37:23

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to JVG, 07-01-2006 12:08:01

You have probably been inidated with request for this pdf file but could i trouble you once more please? If there is a cost I would be willing to pay a fair amount. Thanks

[Log in to Reply] [No Email]

old popper

01-17-2008 14:54:15

Report to Moderator

Re: Tractor Manuals in reply to Howard H., 01-17-2008 09:42:30

There is an old story about an older couple tha gave up farming and moved to the city where "Pa" got a job in a factory. After he had been there a year he mentioned to a co-worker that they were repairin to go down home on vacation. "preparing", the co-worker corrected, "repairing means to fix". "Well", says Pa, "Thats what I said, we is fixin to go on vacation"!

[Log in to Reply] [No Email]

CRAIG HOSKIN

05-02-2007 19:46:26

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to JVG, 07-01-2006 12:08:01

I have a 51134 tiller and I have lost the belts in a adress move. I would greatly appreciate the original lengths and a picture of the drive belt routing. I only have a small mailbox and dialup internet. Thanks

[Log in to Reply] [No Email]

Tom Stewart

03-16-2007 17:17:57

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to JVG, 07-01-2006 12:08:01

I need a copy of your owners manual for a Gilson model 113445917 rototiller. I need to know the belt sizes or numbers. Any help you can give me will be greatly appreciated. Thanks, Tom

[Log in to Reply] [No Email]

John Lecky

03-31-2007 13:20:50

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to Tom Stewart , 03-16-2007 17:17:57

I will gladly purchase a parts list and belt routing description and/or a complete service manual. Please contact me with details.

[Log in to Reply] [No Email]

Bob Dubos

08-11-2006 09:42:33

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to JVG, 07-01-2006 12:08:01

I was just given a Gilson tiller model no. 51114. I would appreciate a copy of the pdf file.

[Log in to Reply] [No Email]

Tom Wolff

07-01-2006 15:53:37

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to JVG, 07-01-2006 12:08:01

YES!! PLEASE!! THANK YOU!!

[Log in to Reply] [No Email]

Gary Davis

12-24-2005 09:30:18

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to John Pucher, 05-07-2004 13:13:07

I too am in need of the manual for the 5113445917 Gilson rear tine tiller. Can I possibly get a copy? or if someone else has a copy: a copy of a copy would be OK with me. Thanks, Gary

[Log in to Reply] [No Email]

JeffA1

12-24-2005 06:52:14

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to John Pucher, 05-07-2004 13:13:07

Hi John,

I would like to get a copy of the Manual. Gilson Model: 51134 45917

Thank you,
Jeff

[Log in to Reply] [No Email]

gen

08-15-2005 21:03:14

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to John Pucher, 05-07-2004 13:13:07

just saw this post RE:Gilson Rototiller model 51134 45917. . can i get a copy of your manual by email or at least a diagram of transmission/gear box and parts list.

[Log in to Reply] [No Email]

jed1950

07-03-2005 15:16:40

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to John Pucher, 05-07-2004 13:13:07

is it still possible to purchase a copy of your Gilson tiller manual model #51134 45917

[Log in to Reply] [No Email]

don petersen

06-01-2005 16:32:44

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to John Pucher, 05-07-2004 13:13:07

I have a tiller mod #51134 45917. Is their any chance you could email a copy or get a copy by mail please e-mail me thanks

[Log in to Reply] [No Email]

steve

06-21-2004 07:35:59

Report to Moderator

Re: Re: Re: Re: Re: rototiller in reply to John Pucher, 05-07-2004 13:13:07

Is there any chance I could get a copy of the belt routing by fax or ?

[Log in to Reply] [No Email]

Don Durante

02-17-2000 19:12:45

Report to Moderator

Re: rototiller in reply to Dave, 11-06-1999 13:15:35

If you still need the belt size, I'll check my "old" belt books for you. Send me your e-mail address or check our site at perpow.com for phone, fax,toll free numbers.
Don---perpow.com

[Log in to Reply] [No Email]

Corey

11-08-1999 07:26:12

Report to Moderator

Re: rototiller in reply to Dave, 11-06-1999 13:15:35

Take a string and tie it around your pulleys, take it off and take it to your local parts store. They will put it on the gauge and tell you which size you need!

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy