TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

Alan in NE

Welcome Guest, Log in or Register

Author

Ron in N.E. Col

11-20-2007 07:03:17

Report to Moderator

Alan, I have been following your posts on the Gleaners. I am a JD collector and like the wheatland versions. I am having a terrible time finding good used 18.4x30 or 18.4x34 tires for these JDs. Is there a chance that any of these parts combines would have any decent tires? I know some of the Gleaner combines used them. If you would happen to have any good used tires of this size,and want to part with them, let me know.Thanks, Ron

[Log in to Reply] [No Email]

PatMz

11-20-2007 11:23:58

Report to Moderator

Re: Alan in NE in reply to Ron in N.E. Colo, 11-20-2007 07:03:17

I had the same trouble finding tires for my Farmall M, I finally bought new ones at GCR Tires:

Brighton 303-659-2011
Colorado Springs 719-390-4241
Denver 303.765.2100
Denver 303-388-6464
Grand Junction 970.241.2090

[Log in to Reply] [No Email]

R. John Johnson

11-20-2007 10:45:35

Report to Moderator

Re: Alan in NE in reply to Ron in N.E. Colo, 11-20-2007 07:03:17

Ron

It's too bad you are so far away. I have a set of 18.4 X 30 tires, rims and fluid I took off our 4010. I also have a pair of 30" cast centers for a 4020 and a set of 34" cast centers for 4010. It would have to travel almost 200 miles just to get to Pembina ND.

John

[Log in to Reply] [No Email]

Ron in N.E. Colo

11-20-2007 10:00:19

Report to Moderator

Re: Alan in NE in reply to Ron in N.E. Colo, 11-20-2007 07:03:17

My email should be open, Thanks

[Log in to Reply] [No Email]

KEB

11-20-2007 13:02:14

Report to Moderator

Re: Alan in NE in reply to Ron in N.E. Colo, 11-20-2007 10:00:19

Ron, sent you an e-mail.

Keith

[Log in to Reply] [No Email]

Ron in N.E. Colo

11-20-2007 09:52:26

Report to Moderator

Re: Alan in NE in reply to Ron in N.E. Colo, 11-20-2007 07:03:17

I am about 70 miles east of Sterling. My ranch is on the Colo-Ne stateline, southeast of Holyoke. I can get 13x26 and 23.1x26 tires around here for almost nothing. The 55 and 95 JD combines used them and are plentiful. I would be interested in the 18.4x30 used tires, as I have a JD 70 LP Standard that is sitting on bare rims right now. Alan, I can't get the email to go through. If any of you are interested in the 26 inch tires, let me know, as horsetrading seems to be in my blood. Thanks, Ron

[Log in to Reply] [No Email]

Jim James

11-21-2007 08:43:16

Report to Moderator

Re: Alan in NE in reply to Ron in N.E. Colo, 11-20-2007 09:52:26

I am down by Lamar,Co. I could use some of those 13-26 if you have acess to a nice matched pair.Let me know

[Log in to Reply] [No Email]

KEB

11-20-2007 09:23:30

Report to Moderator

Re: Alan in NE tires in reply to Ron in N.E. Colo, 11-20-2007 07:03:17

Ron, where in NE Colorado are you? I have a couple pair of 18.4 X 30 tires that I picked up for free as part of another deal, and have no use for them. They're both pretty worn, but are probably useable.

I'm about 10 mi east of Parker. Let me know if you want them. Something to trade would be good, otherwise you can have them as I just want to get them out of the way.

E-mail is open, let me know if you're interested. I've got to go run an errand, but can take some pictures if you're interested.

Keith

[Log in to Reply] [No Email]

Allan In NE

11-20-2007 09:34:28

Report to Moderator

Re: Alan in NE tires in reply to KEB, 11-20-2007 09:23:30

Boy! I like you people!

Helping out one another like this. Makes a feller plump proud to "know" ya. :>)

Allan

[Log in to Reply] [No Email]

JMS/.MN

11-20-2007 09:04:44

Report to Moderator

Re: Alan in NE in reply to Ron in N.E. Colo, 11-20-2007 07:03:17

Lots of Gleaner M, M2 combines used the 18.4-30. 4020 Often came with the 18.4-34.

[Log in to Reply] [No Email]

Leland

11-20-2007 08:21:41

Report to Moderator

Re: Alan in NE in reply to Ron in N.E. Colo, 11-20-2007 07:03:17

try www.tiretown.com

[Log in to Reply] [No Email]

Allan In NE

11-20-2007 07:12:05

Report to Moderator

Re: Alan in NE in reply to Ron in N.E. Colo, 11-20-2007 07:03:17

Hi Ron,

Boy, if I had 'em they would be yours for the asking free of charge.

That's another rub tho; looks like I'll be buying a set of tires 'cause these are totally shot. Smaller size on these little machines too; only 26".

Allan

[Log in to Reply] [No Email]

JoeBob/IN

11-20-2007 09:16:54

Report to Moderator

Re: Alan in NE in reply to Allan In NE, 11-20-2007 07:12:05

I think I have a set of 23.1-26's off that F2 the engine came outta and maybe a set of 18.4-26's off the other F2 we had. Will take pics and post later today hopefully. Where is the machine with the walkers and engine coming from?

[Log in to Reply] [No Email]

Allan In NE

11-20-2007 09:41:04

Report to Moderator

Re: Alan in NE in reply to JoeBob/IN, 11-20-2007 09:16:54

Hi Joe,

He's down in the southern end of the state from what I gather.

He's been busy the past two weeks stripping that old machine. Sending the complete engine pod assembly, all four walkers, return elevator and a box of small odds and ends.

Sounds like the stuff is going to be loaded on Friday and start the westward trek across the country. Should be in Grinell, IA the first of the week, I'd guess.

I'd better get busy so I'll be ready for it when it finally makes it clear out here to no-man's land. :>)

Allan

[Log in to Reply] [No Email]

Allan In NE

11-20-2007 07:21:41

Report to Moderator

Re: Alan in NE in reply to Allan In NE, 11-20-2007 07:12:05

Ron,

Shoot me an email. Might have your problem figured out.

Allan

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy