TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Used tractor prices

Welcome Guest, Log in or Register

Author

david

12-07-1999 02:11:48

Report to Moderator

does anyone know of a good place to get a price list for used tractor?

thanks,

david

[Log in to Reply] [No Email]

Bill Reed

11-01-2000 16:40:50

Report to Moderator

Re: used tractor prices in reply to david, 12-07-1999 02:11:48

Have a chance to by a 1986-87 John Deer Skid Steer. What would a fair price be?

[Log in to Reply] [No Email]

jim hicks

12-13-2001 07:56:12

Report to Moderator

Re: Re: used tractor prices in reply to Bill Reed, 11-01-2000 16:40:50

i am looking to purchase a ford 800 with a loader or without then i will purchase a loader latter could you help me with a round about price to pay for it?and will finding a loader seperatly be diffacult?thanks

[Log in to Reply] [No Email]

Corky Bluhm

06-02-2002 09:02:43

Report to Moderator

Re: Re: Re: used tractor prices in reply to jim hicks, 12-13-2001 07:56:12

I have a ford 800 tractor with a box blade, rototiller. and a not very good brush hog (works though) for $5,000.00. I live in Mount Vernon, Washington.

[Log in to Reply] [No Email]

Jim Bullock

04-03-2001 11:25:53

Report to Moderator

Re: Re: used tractor prices in reply to Bill Reed, 11-01-2000 16:40:50

Have a chance to buy a used:
1981 Rounder (Prime Mover) Skid-steer loader

*40 hp isuzu diesel engine
*6 ft snow bucket
*4 ft gravel bucket w/ teeth
*new radiator, starter, battery, implement pump engine heater
*heated cab w/ lights
* dual axle 3500 lb trailer for $7500 Canadian, how do you feel about this price, owner was is a diesel machanic has done quite a bit of work to it....loader is in fairly good condition, looking at it to do landscaping work around the house

[Log in to Reply] [No Email]

hay

12-07-1999 07:31:14

Report to Moderator

Re: used tractor prices in reply to david, 12-07-1999 02:11:48

i use intertec's book. "Used Tractor Price Guide" Intertec Publishing, P.O. Box 12901, Overland Park, KS 66282-2901.

[Log in to Reply] [No Email]

Tom Rasche

05-15-2002 14:48:06

Report to Moderator

Re: Re: used tractor prices in reply to hay, 12-07-1999 07:31:14

I have a 1942 Cat D-4 with overhead winch dozing blade. It runs real good and is in good shape.
Can anyone tell me its sale value. I'm looking to sellit.

[Log in to Reply] [No Email]

larry

05-14-2002 22:05:32

Report to Moderator

Re: Re: used tractor prices in reply to hay, 12-07-1999 07:31:14

could someone tell me what a 1948 farmall super c in excellent condition with the belly plow pull behind plow and a planter is worth

[Log in to Reply] [No Email]

idowu emmanuel

12-08-2004 04:46:22

Report to Moderator

Re: Re: Re: used tractor prices in reply to larry, 05-14-2002 22:05:32

THIS IS TO INFORM THAT I AM INTERESTED IN PURCHASING THE AS ADVERTISED,PLS I LIKE YOU TO BE INFORMED THAT I INTEND TO MAKE PAYMENT BY A CERTIFIED CHEQUE,PLS I AWAIT YOUR URGENT REPLY.THANKS
IDOWU EMMANUEL.

[Log in to Reply] [No Email]

MIKE YALE

04-13-2002 16:32:20

Report to Moderator

Re: Re: used tractor prices in reply to hay, 12-07-1999 07:31:14

I HAVE A 1950 ALLIS-CHALMERS MODEL B, GOOD CONDITION, NEW PAINT, NEW RIMS ON FRONT, NEW BACK BRAKES, RUNS GOOD, SMOKES SLIGHTLY. MOTOR REBUILT ABOUT 20 YEARS AGO. RUNS ABOUT 25-30 HOURS PER YEAR. HAS PTO,5' SICKLE BAR AND TWO PLOWS, HYDRAULIC LIFT. ANYONE KNOW WHAT A GOOD ASKING PRICE WOULD BE? THANKS

[Log in to Reply] [No Email]

Greg O

02-14-2002 18:47:21

Report to Moderator

Re: Re: used tractor prices in reply to hay, 12-07-1999 07:31:14

For used tractor prices try machinerylink.com

[Log in to Reply] [No Email]

Crem

01-07-2011 17:39:04

Report to Moderator

Re: OT How did you choose your career? in reply to bkpigs, 01-07-2011 11:59:03

I grew up on a farm and after high school I worked in a neighboring apple orchard for two years. It was fun in the summer but crawling up in a tree in the winter when it was 10 degrees out changed my mind. I quit and went to vocational school for auto mechanics and found a job at a small shop. That turned out to be a dirty, pressure to get jobs out without any help awakening. The local large factory had some job openings. I put in an application and about a week later I called them back and they told me to come over. I started in the punch press dept which was hard work and monotonous. I worked the night shifts and went back to school in Industrial electronics. After completing two years of school with very little sleep the company was just starting maintenance apprenticeship programs. I got into the Mechanical program and after 5 years of that I applied for the Electrical maintenance. That is where I ended up and am now retired after 39 years at that company. I didn't have any real plan but just kept trying to improve whatever I could. I have some tractors and implements that I play with and that is what draws me to this and the Tool Talk site.

[Log in to Reply] [No Email]

Mike W.

06-07-2001 14:11:55

Report to Moderator

Re: Re: used tractor prices in reply to hay, 12-07-1999 07:31:14

I have a John Deere Model 50 tractor that I really love but need to sell for something more pratical to farm with. I can't afford both.

It has a snow plow and is in very good condition, except one rear tire has some cracking. I would also throw in a set of tire chains.

Does anyone know roughly what it is worth?

[Log in to Reply] [No Email]

BOB

02-03-2001 15:49:21

Report to Moderator

Re: Re: used tractor prices in reply to hay, 12-07-1999 07:31:14

WHAT WOULD BE THE RETAIL/WHOLESALE PRICE FOR A 1986 john deere tractor model 1050 4wd diesel with 2,409 hours and a front end loader.

second one: 1986 john deere tractor model 1050 2wd diesel unk hours, no front loader.tks bob

[Log in to Reply] [No Email]

Jerome Kinsler

01-30-2001 13:56:55

Report to Moderator

Re: Re: used tractor prices in reply to hay, 12-07-1999 07:31:14

I need to know the value of the following tractor..
Ford 1700 1979 yr. model 910.8 actual hours paint is dull but oterwise great shape

Thanks!

[Log in to Reply] [No Email]

Bill Cameron

10-17-2000 22:22:09

Report to Moderator

Re: Re: used tractor prices in reply to hay, 12-07-1999 07:31:14

I have two lawn tractors:
1) Wheel Horse 252h serial #2213KE02 model 45277 with a Kawasaki engine FB460v.
2) Work Horse made by Wheel Horse GT 1642 8 speed ID # A116420R with a Briggs and Statton engine 16 hp 4 cly @ 3600 rpm.

I would like to know an approximate value of each.

Thank You

[Log in to Reply] [No Email]

Judy

10-05-2000 14:37:38

Report to Moderator

Re: Re: used tractor prices in reply to hay, 12-07-1999 07:31:14

I found a "Used tractor price Guide" isbn# 0872887316 for $11.65 on Amazon.com.

[Log in to Reply] [No Email]

David

10-02-2000 17:38:13

Report to Moderator

Re: Re: used tractor prices in reply to hay, 12-07-1999 07:31:14

Request purshase and trade-in price for a 1988 Ingersall 16Hp with 48" mower deck. Thanks, Dave

[Log in to Reply] [No Email]

FRANK JONES

03-02-2001 17:42:46

Report to Moderator

Re: Re: Re: used tractor prices in reply to David, 10-02-2000 17:38:13

COULD SOME ONE TELL ME THE APPROX. VALUE OF A 1986 KUBOTA L355SS, 4X4, 37HP, HRS UNK,W/ NEW TIRES. HYD. PUMP, AND CLUTCH. THANKS FRANK JONES

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy