TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

Ford-New Holland 3930 Experience

Welcome Guest, Log in or Register

Author

2510Paul

05-05-2008 13:25:42

Report to Moderator

I am looking at a 1998 Ford-New Holland 3930 tractor with loader, MFWD. Can anyone give me input regarding their experience with them. It also has a syncrhoreverse on it. Does anyone know if the clutch is dry or wet? Thanks. Paul

[Log in to Reply] [No Email]

Rick Kr

05-06-2008 06:42:22

Report to Moderator

Re: Ford-New Holland 3930 Experience in reply to 2510Paul, 05-05-2008 13:25:42

I own a 98 3930 fwa, 8 x 8 reverser, 7310 loader. It has been great.

Only problem has been the previous owner did not grease the front axle pivot properly. Other than those front axle parts, all other work has been general maintanence, oil, filters, little wear out parts, etc.

I use it for almost all things, from tillage to loader work. I run it pretty hard but dont try to abuse it.

Only thing I want out of this tractor, is a little more HP, 4630, 4830 etc.

I just hope when this tractor wears out, the next one will be just as reliable.

Rick

[Log in to Reply] [No Email]

Ron in AR

05-05-2008 18:16:20

Report to Moderator

Re: Ford-New Holland 3930 Experience in reply to 2510Paul, 05-05-2008 13:25:42

Of all my five tractors, my 3930 w/loader gets the most use. Mowing, moving round bales all year round, brush hogging, loading litter in my spreader truck, occiasionally pulling a baler, grading the driveway, and so on. It's never failed me yet.

[Log in to Reply] [No Email]

Joe Styke

05-05-2008 17:22:18

Report to Moderator

Re: Ford-New Holland 3930 Experience in reply to 2510Paul, 05-05-2008 13:25:42

By far one of the best tractors ever built.i have one and it's big brother 4630 and would not trade for any other make.

[Log in to Reply] [No Email]

RodInNS

05-05-2008 14:05:09

Report to Moderator

Re: Ford-New Holland 3930 Experience in reply to 2510Paul, 05-05-2008 13:25:42

Dry clutch. Good heavy tractor, but with a loader you can break the front axle (hubs) in heavy pulling.
I've been through just about everythign but the rear axle in ours, but it's used like an 80 hp tractor most of the time, so you get what you pay for.
If used as the 45 hp tractor that it is, then it's pretty tough.

Rod

[Log in to Reply] [No Email]

495man

05-05-2008 13:31:47

Report to Moderator

Re: Ford-New Holland 3930 Experience in reply to 2510Paul, 05-05-2008 13:25:42

Dry clutch

8X8 shuttle works ok.

(ran a 5030 w/ 7310 loader)

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy