Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Whats a buzz saw?

Welcome Guest, Log in or Register
Author 
Dalton S.

05-13-2008 17:30:46




Report to Moderator

Here's a dumb question for ya. What the heck is a buzz saw? Could someone post some pics? Thanks




[Log in to Reply]   [No Email]
George G

05-15-2008 12:42:24




Report to Moderator
 Re: Whats a buzz saw? in reply to Dalton S., 05-13-2008 17:30:46  
third party image

third party image

Here's mine



[Log in to Reply]  [No Email]
Jeff-oh

05-15-2008 09:42:26




Report to Moderator
 Re: Whats a buzz saw? in reply to Dalton S., 05-13-2008 17:30:46  
Does that Case in the background have the hitch on the front so it can be pulled around be one of the Deers?



[Log in to Reply]  [No Email]
dave2

05-14-2008 07:38:09




Report to Moderator
 Re: Whats a buzz saw? in reply to Dalton S., 05-13-2008 17:30:46  
Link

Here's a safer version..... .. With all the gaurds and safety devices, I managed to about knock my head off when a log kicked back. But, when the blade spins the right direction (I had the polarity reversed), it cuts through wood like butter.

Dave



[Log in to Reply]  [No Email]
Goose

05-14-2008 07:10:16




Report to Moderator
 Re: Whats a buzz saw? in reply to Dalton S., 05-13-2008 17:30:46  
An uncle of mine and I are both missing our left index finger to the second joint.

I got mine caught in the gears of a pump jack when I was 16 months old. My uncle lost his in a buzz saw sawing firewood.



[Log in to Reply]  [No Email]
El Toro

05-14-2008 04:12:21




Report to Moderator
 Re: Whats a buzz saw? in reply to Dalton S., 05-13-2008 17:30:46  
third party image

Here's one. Be careful using one of these. Hal



[Log in to Reply]  [No Email]
garytomaszewski

05-14-2008 17:46:57




Report to Moderator
 Re: Whats a buzz saw? in reply to El Toro, 05-14-2008 04:12:21  
Hal, ours had a big cast flywheel, too. Would that have been to smooth out the JD A or just for momentum?



[Log in to Reply]  [No Email]
buickanddeere

05-14-2008 05:41:02




Report to Moderator
 Re: Whats a buzz saw? in reply to El Toro, 05-14-2008 04:12:21  
Anybody disagree that some guards and shielding would be a good idea?



[Log in to Reply]  [No Email]
El Toro

05-14-2008 05:57:31




Report to Moderator
 Re: Whats a buzz saw? in reply to buickanddeere, 05-14-2008 05:41:02  
I know they're nice for sawing cordwood, but they're dangerous and you had better not be careless when using one of these saws. Personally I like a chain saw better. We had one of those buzz saws that was mounted on a Farmall H
and we drove it into the woods. We only cut up trees that were dead or down. Used a crosscut saw back then to cut pieces to a length we could handle. Then used the H and buzz saw. Hal

[Log in to Reply]  [No Email]
dave guest

05-13-2008 22:31:10




Report to Moderator
 Re: Whats a buzz saw? in reply to Dalton S., 05-13-2008 17:30:46  
To me a buzz saw is a home-made saw of any type. Usually stationary and used to cut firewood with motor and belt drive underneath.



[Log in to Reply]  [No Email]
Spook

05-13-2008 18:49:30




Report to Moderator
 Re: Whats a buzz saw? in reply to Dalton S., 05-13-2008 17:30:46  
One mistake there could be real serious. I thought about getting one, several older guys told me to forget about it. One guy told me that after his dad passed, the only thing him and his brothers agreed on was to dump the buzz rig in hole and bury it with some other junk. None of them wanted it, even for free.



[Log in to Reply]  [No Email]
36 coupe

05-14-2008 01:59:47




Report to Moderator
 Re: Whats a buzz saw? in reply to Spook, 05-13-2008 18:49:30  
They probably wanted to avoid the work of sawing fire wood.5.00 fuel oil will get a lot of old saws running again.Fire wood is selling for 200.00 a cord here.



[Log in to Reply]  [No Email]
Dalton S.

05-14-2008 04:30:47




Report to Moderator
 Hey 36 coupe in reply to 36 coupe, 05-14-2008 01:59:47  
Hey 36 coupe, where are you located? Around here, dried oak firewood is only going for about $50 a facecord.



[Log in to Reply]  [No Email]
3 6 coupe

05-15-2008 06:25:24




Report to Moderator
 Re: Hey 36 coupe in reply to Dalton S., 05-14-2008 04:30:47  
Face cord cant be used in Maine to sell wood.Cord is 4x4 by 8 = 128 cu feet .Four foot wood will shrink to 100 cu feet if sawed to 12 inch sticks.Face cord can have only 25 cu feet of actual wood.A 10 cord load of tree length can shrink to 8 cord if cut to 4 foot wood.Towns used to have an officer who was called a measurer of bark and wood in past years.Looks like we need them now to keep wood sellers honest.

[Log in to Reply]  [No Email]
Janicholson

05-13-2008 17:53:48




Report to Moderator
 Re: Whats a buzz saw? in reply to Dalton S., 05-13-2008 17:30:46  
A traditional definition is:
A flat belt driven radial saw that resembles a huge tablesaw. The blade is usually over 18" diameter usually 24+. The arbor runs across the top of the frame, and the saw is monted on that. The units are designed with a sliding or tilting table that "kinda" holds the limb or log in position and supports it as the table is pushed manually past the blade. They usuakky run near twice drive speed using a smaller ~6-7" pulley on the driven end, and a standard 9 or 10" pulley on the drive (tractor) end. They can be stand alone, with legs and ground anckors, or monted to the tractor to allow freedom of movement.
Dangerous
hard on the labor end of things
very noisy
and considered way better than an axe, or buck saw. JimN

[Log in to Reply]  [No Email]
36 coupe

05-14-2008 01:50:01




Report to Moderator
 Re: Whats a buzz saw? in reply to Janicholson, 05-13-2008 17:53:48  
A chain saw is far more dangerous.A buzz saw never moves around.You just have to be smart enough to stay away from the blade.I saw alone ,just let the cut pieces drop and move along the pile.I know plenty of people who have been cut by a chain saw.I call them a cord wood saw,a sharp saw cuts quiet.The new shaft drive saws are well guarded.Ive worked around sawmills.The sawyer and the off bearer have no reason to be near the running saw blade.If some one is taking away from a cordwood saw they cant be dreamers or wave their hands around.All tools can get you.

[Log in to Reply]  [No Email]
Mark - IN.

05-13-2008 17:50:58




Report to Moderator
 Re: Whats a buzz saw? in reply to Dalton S., 05-13-2008 17:30:46  
What comes to mind when I think of a buzzsaw, is watch the fingers. What also comes to mind is that 4' diameter blade on that portable sawmill that a guy stumbled into down the road a few years back when cutting in some new 18" supports for the barn. They didn't even take him to the local hospital by ambulance, they just kind of picked him up in a helicopter and flew him down to Indy from the farm. He lived, but he was a mess and so was the saw. That's what comes to mind when I think of buzzsaw. I'll just stick to my worm gear circulars, chop saws, sawzalls, and little stuff like that.

[Log in to Reply]  [No Email]
Eric in IL

05-13-2008 17:48:58




Report to Moderator
 Re: Whats a buzz saw? in reply to Dalton S., 05-13-2008 17:30:46  
third party image

.



[Log in to Reply]  [No Email]
Bendee

05-13-2008 21:52:44




Report to Moderator
 Re: Whats a buzz saw? in reply to Eric in IL, 05-13-2008 17:48:58  
I use one of these to saw fire wood,it's a one man operation.Don't they have safety inspectors at these shows.?



[Log in to Reply]  [No Email]
Crem

05-13-2008 19:57:19




Report to Moderator
 Re: Whats a buzz saw? in reply to Eric in IL, 05-13-2008 17:48:58  
I still have a buzz saw that was made by a neighbor for a Case tractor just like the one in your picture. He even arc welded patent pending on the frame. It was made with square tubing that mounted in the square holes right behind the front wheels. The belt went directly to the pulley. It was nice because we could drive it around to the pile. When I was a kid, dad and I, or my brothers sawed up a lot of fire wood with that thing.

[Log in to Reply]  [No Email]
Mark - IN.

05-13-2008 17:54:03




Report to Moderator
 Re: Whats a buzz saw? in reply to Eric in IL, 05-13-2008 17:48:58  
Yep, that would be pretty close to what I was thinking. Gotta be real careful around that guy.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy